Quick Link
Quick Contact
Address
6 building,No 98, Fulian 1 road,Baoshan district, Shanghai, China.
Tel
86-021-80392549
Our Newsletter
Subscribe to our newsletter for discounts and more.
| Parameter / 参数 | RH56E2-0 Series | RH56E2-2 Series | Remarks / 说明 |
|---|---|---|---|
| Model / 型号 | RH56E2-0R, RH56E2-0L | RH56E2-2R, RH56E2-2L | Right hand and left hand versions |
| Degrees of Freedom / 自由度 | 6 DOF | 6 DOF | Human-hand-like motion range |
| Number of Joints / 关节数 | 12 | 12 | Five fingers with coupled joints |
| Weight / 整手重量 | 770 ± 10 g | 790 ± 10 g | Tactile modules add 20 g |
| Operating Voltage / 工作电压 | 24 V ± 10% | 24 V ± 10% | DC input |
| Quiescent Current / 静态电流 | 0.2 A | 0.25 A | Idle holding state |
| Peak Current / 峰值电流 | 4 A | 4 A | Transient at full load |
| Repeatability / 重复定位精度 | ± 0.20 mm | ± 0.20 mm | Consistent pick-and-place |
| Thumb Fingertip Strength / 拇指指尖力 | 30 N | 30 N | Opposing grip |
| Fingertip Strength / 四指指尖力 | 28 N | 28 N | Per finger |
| Force Resolution / 力分辨率 | 0.05 N | 0.05 N | Closed-loop force control |
| Thumb Lateral Rotation / 拇指侧摆范围 | 75° – 170° | 75° – 170° | Lateral rotation of thumb |
| Thumb Rotation Speed / 拇指侧摆速度 | > 130 °/s | > 130 °/s | Fast re-orientation |
| Thumb Flexion Speed / 拇指弯曲速度 | > 130 °/s | > 130 °/s | Powered by brushless actuators |
| Four-Finger Flexion Speed / 四指弯曲速度 | > 200 °/s | > 200 °/s | Rapid closing under load |
| Hand Closing Time / 闭合时间 | 0.8 s | 0.8 s | Full stroke |
| Tactile Sensor Range / 触觉量程 | Optional | 0 – 30 N (T1) / 0 – 20 N (T2) | Resistance or capacitive |
| Tactile Sensor Accuracy / 触觉精度 | — | ≤ 5% FS | Full-scale accuracy |
| Number of Tactile Sensors / 触觉点数 | — | 17 (T1) / 5 (T2) | Covering palm and fingers |
| Control Interface / 通信接口 | RS485, CAN, Modbus TCP | RS485, CAN, Modbus TCP | Industrial fieldbus ready |
Q1: What is the difference between the RH56E2-0 and RH56E2-2 series?
A: The RH56E2-0 series is the standard version at 770 g with 0.2 A quiescent current. The RH56E2-2 series adds tactile sensing at 790 g with 0.25 A quiescent current, and is available with resistance (T1) or capacitive (T2) sensor modules.
Q2: How much can the hand actually lift?
A: Fingertip gripping force is 3 kg and the overall load capacity is equivalent to 15 kg. The practical limit depends on grasp geometry, friction and acceleration in your cell.
Q3: Does the hand hold the workpiece if power fails?
A: Yes. The power-off self-locking mechanism retains the grasp without power, which is important for emergency stops and vertical handling.
Q4: Which control interfaces are supported?
A: RS485, CAN and Modbus TCP are supported. Right-hand and left-hand models use the same protocol, so a single controller can drive both.
Q5: Can the tactile modules be added later?
A: Tactile sensing is specified by model. Please confirm T1 resistance or T2 capacitive sensing when ordering so the correct sensor set is delivered.
Q6: What is the lead time for samples and bulk orders?
A: Stock units ship in 7–15 working days. Monthly supply capacity is 500 sets, and mixed left-hand and right-hand orders are supported.