logo

RH56H1 Dexterous Hand 6 DOF 12 Joints 30kg Payload 0.1N Force Resolution 24 Sensors

Place of Origin: China
Brand Name: INSPIRE-ROBOTS
Certification: CE
Model Number: RH56H1-E2R / RH56H1-E2L / RH56H1-E4R / RH56H1-E4L
Minimum Order Quantity: 1 Set
Price: 1800
Packaging Details: Foam-lined carton with shock indicator, one hand per carton
Delivery Time: 7-15 Working Days
Payment Terms: T/T,L/C at sight
Supply Ability: 500 Sets per Month
Inquiry Now
Get A Quote
Specifications
Highlight Features

6 DOF 12 Joints Dexterous Hand

,

24 Sensor Multi-Mode Sensing

,

30kg Passive Payload Robotic Gripper

Repeatability / 重复定位精度:
±0.2 Mm
Passive Payload / 被动负载:
30 Kg
Application / 应用场景:
Embodied AI Research, Teleoperation, Collaborative Robot Assembly, Pick-and-place, Laboratory Automation
Weight / 整手重量:
630±10 G (right Hand), 620±10 G (left Hand)
Force Resolution / 力分辨率:
0.1 N
Operating Voltage / 工作电压:
24-48 V DC
Product Name / 产品名称:
RH56H1 Series Dexterous Hand
Number Of Joints / 关节数:
12 Joints
Tactile Sensor / 触觉传感器:
8 Channels, 30 N Range, 5% FS Accuracy
Fingertip Strength / 指尖力:
≥20 N (thumb ≥15 N)
Control Interface / 通信接口:
EtherCAT + RS485 (E2 Series); EtherCAT + CAN FD (E4 Series)
Degrees Of Freedom / 自由度:
6 DOF
Product Description

Overview

  • • RH56H1 Series is a five-finger anthropomorphic dexterous hand engineered for embodied AI robots, teleoperation platforms and industrial assembly cells.
  • • Six degrees of freedom and twelve joints reproduce human thumb opposition together with independent flexion of the four fingers.
  • • A 630 g all-metal integrated skeleton carries 24 sensors in four modalities, so grasp state, contact force, joint position and temperature are reported continuously.
  • • EtherCAT and RS485 or CAN FD control interfaces run 1 kHz real-time communication for smooth, low-latency trajectory tracking.
  • • Repeatability of 0.2 mm, 0.1 N force resolution and a closing time below 0.8 s make the hand suitable for repeatable small-part handling.
  • • Right-hand and left-hand models are supplied as RH56H1-E2R, RH56H1-E2L, RH56H1-E4R and RH56H1-E4L, each available with or without integrated tactile skin.
  • • The hand passes 20 stages of stringent factory testing before shipment, covering joint endurance, force calibration and communication stability.

Specifications

Parameter RH56H1-E2 Series
(EtherCAT + RS485)
RH56H1-E4 Series
(EtherCAT + CAN FD)
Unit
Degrees of Freedom66DOF
Number of Joints1212pcs
Weight (Right / Left)630 ± 10 / 620 ± 10630 ± 10 / 620 ± 10g
Operating Voltage24 – 4824 – 48V DC
Quiescent Current (RS485 / CAN FD)194 ± 10 mA @ 24 V193 ± 10 mA @ 24 VmA
Quiescent Current (EtherCAT)101 ± 10 mA @ 24 V206 ± 10 mA @ 24 VmA
Peak Current5 @ 24 V5 @ 24 VA
Repeatability± 0.2± 0.2mm
Thumb Fingertip Strength≥ 15≥ 15N
Fingertip Strength≥ 20≥ 20N
Force Resolution0.10.1N
Thumb Lateral Rotation Range60 – 18060 – 180°
Thumb Lateral Rotation Speed> 155> 155°/s
Thumb Flexion Speed> 37> 37°/s
Four-Finger Flexion Speed> 107> 107°/s
Tactile Sensor Range3030N
Tactile Sensor Accuracy55% FS
Number of Tactile Sensors88channels
Hand Closing Time< 0.8< 0.8s
Communication Rate11kHz
Passive Payload3030kg
  • • Four finishes are available: black, white, silver and grey, so the hand can match existing robot livery.
  • • The -TI suffix identifies versions with tactile skin; the base version reports force and position without skin contact sensing.

Advantages

Precision Craftsmanship

  • • The all-metal integrated skeleton removes plastic flex under load and keeps finger alignment stable across millions of cycles.
  • • Innovative concealed wiring routes every harness inside the palm and wrist, eliminating snagging on fixtures.
  • • Twelve joints are driven to 0.2 mm repeatability, which is mandatory for peg-in-hole and connector insertion work.

Intelligent Sensing

  • • 24 sensors in four types cover tactile, force, position and temperature feedback in a single hand.
  • • Tactile skin spans a 30 N range at 5 percent full-scale accuracy across eight sensing channels.
  • • Force resolution of 0.1 N lets the controller detect fragile parts before deformation occurs.
  • • Fingertip strength of 20 N and thumb strength of 15 N balance delicate grip with firm holding.

Stable Operation

  • • A 30 kg passive payload withstands static loads during tool changes and emergency stops.
  • • Each unit passes 20 stages of stringent tests, including joint endurance, thermal drift and bus stability checks.
  • • 1 kHz real-time communication keeps command latency low on both EtherCAT and RS485 or CAN FD links.
  • • A hand closing time under 0.8 s shortens each pick-and-place cycle and raises cell throughput.

Applications

  • • Embodied AI research: dexterous manipulation datasets, imitation learning and vision-language-action experiments.
  • • Teleoperation: remote handling tasks where force and tactile feedback replace direct human contact.
  • • Collaborative robot assembly: small-part insertion, cable routing, screw starting and connector mating.
  • • Industrial pick-and-place: machine tending on lines where part geometry changes between batches.
  • • Laboratory automation: tube handling, sample transfer and instrument loading in life science workflows.
  • • Hazardous environment operation: inspection and maintenance tasks performed outside human reach.
  • • Education and training: robotics courses that need a human-like end effector with open interfaces.

FAQ

Q1: What is the difference between RH56H1-E2 and RH56H1-E4?

Both versions provide EtherCAT. The E2 series adds an RS485 secondary bus, while the E4 series adds CAN FD, which suits controllers that already run a CAN FD network.

Q2: Can the hand be mounted on a collaborative robot arm?

Yes. The 630 g body and 24 to 48 V DC input match the payload and power envelope of most 3 kg to 10 kg collaborative arms, and the wrist flange is drilled for direct mounting.

Q3: Does the tactile version cost more and is it necessary?

The -TI tactile version is recommended when the task needs contact force feedback, such as fragile part handling. Base versions still report joint torque and position, which is enough for many pick-and-place jobs.

Q4: Which control software is supported?

The hand exposes a documented EtherCAT object dictionary plus RS485 or CAN FD protocol frames, so it can be integrated with common industrial controllers, ROS drivers and custom Python or C++ stacks.

Q5: What lead time applies to a right and left hand pair?

Standard pairs ship within 7 to 15 working days after order confirmation. Sample orders of one piece are accepted for evaluation before volume release.

Related Products
Send An Inquiry