Quick Link
Quick Contact
Address
6 building,No 98, Fulian 1 road,Baoshan district, Shanghai, China.
Tel
86-021-80392549
Our Newsletter
Subscribe to our newsletter for discounts and more.
| Category | Industrial Robot Arm | Type | 6-Axis Articulated |
| Payload | 35 kg | Horizontal Reach | 2538 mm |
| Vertical Reach | 4449 mm | Repeatability | +/-0.07 mm |
| Protection | Body IP54, wrist IP67 | Body Mass | 600 kg |
| Mounting | Floor, wall, tilt, ceiling | Controller | YRC1000 |
| Power Supply | 380-480 VAC | Power Rating | 4.5 kVA |
| Internal I/O | 24 conductors with ground | Internal Air Line | 2 x 3/8 inch |
| Brand | Yaskawa | Primary Application | Material Handling |
Q: What is this industrial robot arm used for?
A: It handles material handling, machine tending, press tending, palletizing, dispensing and material cutting. Share your part and cycle requirement and we confirm the right configuration.
Q: What are the core specifications?
A: The GP35L offers a 35 kg payload, 2,538 mm horizontal reach, 4,449 mm vertical reach and +/-0.07 mm repeatability. The full data set is listed in the specification table above.
Q: How fast is the robot?
A: Axis speeds reach 180 deg/s on the S axis and 250 deg/s on the R and B axes, with high acceleration that shortens the small path cycle and raises output per cell.
Q: How accurate is it?
A: Repeatability is +/-0.07 mm at the tool flange, which is suitable for stable machine loading, dispensing beads and repeatable pick and place.
Q: What protection and power does it need?
A: The wrist is IP67 and the body IP54 as standard, with an XP package raising the body to IP65. Power requirement is 380-480 VAC with a 4.5 kVA rating.
Q: Which controller is supplied?
A: It runs on the compact YRC1000 controller with the lightweight standard teach pendant, intuitive programming and fieldbus options.
Q: How can it be mounted?
A: Floor, wall, tilt and ceiling mounting are all supported, and brakes are included on all six axes for stable holding when power is removed.
Q: Can several robots work close together?
A: Yes. The reduced interference design allows close proximity placement, which is why the GP35L is widely used in high-density workcells.
Q: Can it carry heavy tooling?
A: Yes. High allowable moment and inertia ratings, plus 147 N.m wrist moment on the R and B axes, allow heavier and larger end-of-arm tooling.
Q: Do you support volume orders and delivery?
A: Yes. We supply single units and volume orders, quote FOB and CIF terms on request, and confirm lead time once quantity and configuration are fixed.
Q: What documents and after-sales support are provided?
A: A machinery test report and standard documents ship with the unit where applicable, and spare parts plus technical guidance remain available after delivery.