Quick Link
Quick Contact
Address
6 building,No 98, Fulian 1 road,Baoshan district, Shanghai, China.
Tel
86-021-80392549
Our Newsletter
Subscribe to our newsletter for discounts and more.
The QC-210 is a heavy duty tool changer built around the strongest locking mechanism in the ATI range, rated for 300 kg payloads with 2,710 Nm static moment in X and Y and 2,260 Nm in Z. It is the tool changer to specify when a material handling workstation has to move a large gripper, a vacuum frame or a fixture that is heavy and long at the same time.
The body of this heavy duty tool changer is reinforced where the locking cam sits, and hardened locating pins carry the shear load, so repeat positioning survives the shock of a handling cycle rather than only the static load of a catalog table. Every unit carries locked, unlocked and ready-to-lock sensors, which is what allows a handling cell to interlock on real joint state instead of a timer.
Media module faces are part of the tool changer design, not an add-on: air, fluid, electrical signals, industrial Ethernet and welding current modules all mount on the same body. For a handling workstation running Ethernet cameras and valve manifolds through the wrist, the QC-210 is the version to choose over the QC-160, because the larger body leaves room for control modules with integrated valve adapters.
Five 3/8 NPT and four 1/2 NPT air ports are built in, so a heavy duty tool changer can feed a large vacuum generator and several clamp circuits without an external manifold at the wrist. That is the practical difference between a 300 kg tool changer that fits a real cell and one that only fits a datasheet.
| Model | QC-210 | Type | Heavy duty pneumatic tool changer |
| Suggested Payload Range | 300 kg | Static Locking Moment X-Y | 2,710 Nm |
| Static Locking Moment Z | 2,260 Nm | Air Ports | 5 x 3/8 NPT + 4 x 1/2 NPT |
| Lock Sensors | Locked / Unlocked / Ready-to-lock | Locating | Hardened pins |
| Media Modules | Air, fluid, electrical, industrial Ethernet, welding current | Series | ATI QC heavy duty series |
| Model | Suggested Payload | Static Moment X-Y | Static Moment Z |
| QC-210 | 300 kg | 2,710 Nm | 2,260 Nm |
| QC-310 | 510 kg | 3,290 Nm | 3,160 Nm |
| QC-510 | 700 kg | 4,860 Nm | 3,500 Nm |
| QC-835 | 300 kg | 2,700 Nm | 2,260 Nm |
| QC-850 | 700 kg | 3,500 Nm | 2,500 Nm |
| QC-1210 | 1,350 kg | 5,420 Nm | 5,420 Nm |
| QC-1310 | 2,990 kg | 11,000 Nm | 12,600 Nm |
Q1. What can the QC-210 heavy duty tool changer carry?
The suggested payload range is 300 kg, with 2,710 Nm static locking moment in X-Y and 2,260 Nm in Z. Dynamic ratings sit above the static figures, and we size the tool changer against your acceleration profile.
Q2. What is the difference from the QC-160?
Both are 300 kg class, but the QC-210 heavy duty tool changer has a larger body that accepts control modules with integrated valve adapters, which is why ATI recommends the QC-210 when media modules are required.
Q3. How many air circuits does the tool changer have?
Five 3/8 NPT and four 1/2 NPT ports are built into the QC-210, enough for a vacuum generator plus several clamp circuits without an external manifold.
Q4. Can it pass Ethernet through the wrist?
Yes. Industrial Ethernet modules mount on the standard media faces of the tool changer, so a camera or smart gripper can keep its network link after a tool change.
Q5. How is the joint state verified?
Locked, unlocked and ready-to-lock sensors are integrated in the tool changer and read by the robot controller, so the handling program cannot move with an unconfirmed joint.
Q6. Should I move up to the QC-310?
If the payload goes beyond roughly 300 kg, or if the moment arm grows, the QC-310 raises the rating to 510 kg and 3,290 Nm. We quote both when a handling tool sits near the limit.
Q7. What else belongs in the system?
A heavy duty tool changer needs matching tool plates and stands. ATI supplies floating hangers, dust caps and custom bases, and we include the docking set in the quotation.