Quick Link
Quick Contact
Address
6 building,No 98, Fulian 1 road,Baoshan district, Shanghai, China.
Tel
86-021-80392549
Our Newsletter
Subscribe to our newsletter for discounts and more.
The MC-36R is a manual tool changer for robot workstations that change tools a few times a shift rather than every cycle. A ratchet knob pulls the master and tool side together, so an operator can swap a gripper for a deburring head without air, without a valve and without a controller output. For a 36 kg payload class, the manual tool changer is the most economical way to keep one robot productive across several tasks.
Locking is done by a patented bolt-cam mechanism with a ratchet knob: tightening the knob drives hardened cam bolts into the tool side, and the design keeps several fail-safe features working together so vibration cannot walk the joint loose. Static locking moment is 110 Nm in X and Y and 169 Nm in Z, which is what allows a 36 kg payload tool changer to hold a long gripper or a heavy deburring head without deflection.
The tool side is high-strength stainless steel, which is where wear matters most, and the body carries six 1/8 NPT air ports plus external mounting faces for ATI media modules. That combination lets a manual tool changer pass air to a gripper today and add electrical or fluid modules later without changing the tool changer itself.
| Model | MC-36R | Type | Manual tool changer |
| Suggested Payload Range | 36 kg | Static Locking Moment X-Y | 110 Nm |
| Static Locking Moment Z | 169 Nm | Air Ports | 6 x 1/8 NPT |
| Locking Mechanism | Bolt cam with ratchet knob | Tool Side | High-strength stainless steel |
| Media Modules | External faces for ATI modules | Family | MC manual tool changer series |
| Model | Suggested Payload | Static Moment X-Y | Static Moment Z | Air Ports |
| MC-10 | 5 kg (cobot only) | 3.7 Nm | 12.4 Nm | 4 x M5 or #10-32 |
| MC-16R | 16 kg | 25 Nm | 45.2 Nm | 4 x 1/8 NPT |
| MC-36R | 36 kg | 110 Nm | 169 Nm | 6 x 1/8 NPT |
| MC-50 | 25 kg | 25 Nm | 25 Nm | 4 x M5 |
Q1. How much payload can the MC-36R manual tool changer carry?
The suggested payload range is 36 kg, with static locking moment of 110 Nm in X and Y and 169 Nm in Z. That covers long grippers and heavy deburring heads on this class of tool changer.
Q2. Does the tool changer need air to lock?
No. Locking is by ratchet knob and bolt-cam mechanism, so the manual tool changer holds the tool without air pressure. The six 1/8 NPT ports are for the tool itself, not for the lock.
Q3. How does an operator change a tool?
Align the tool side with the master, then tighten the ratchet knob to lock and loosen it to release. No tools are required, which is why this manual tool changer suits shift-level changeover.
Q4. Will vibration loosen the joint?
The bolt-cam mechanism is a patented design with multiple fail-safe features, intended to resist vibration and stay locked. We still recommend checking locking moment at planned maintenance.
Q5. Can I add electrical or fluid pass-through later?
Yes. External mounting faces accept ATI media modules, so the manual tool changer can gain a locking moment check point plus electrical, fluid or signal pass-through without being replaced.
Q6. Why choose manual instead of an automatic tool changer?
When tools change per shift rather than per cycle, a 36 kg manual tool changer delivers the same flexibility and locking moment performance for roughly half the cost and without air or control logic.