logo

Axia80-M20 500N 20Nm Force Torque Sensor for Robot Grinding Workstation

Place of Origin: United States
Brand Name: ATI
Certification: ISO 9001:2015
Model Number: Axia80-M20
Inquiry Now
Get A Quote
Specifications
Highlight Features

500N Force Torque Sensor

,

20Nm Torque Measurement Range

,

Axia80-M20 Grinding Workstation

Application:
Robot Grinding And Polishing Workstation
Product Name:
Axia80-M20 500N Force Torque Sensor
Range Fx, Fy:
+/-500 N
Range Fz:
+/-900 N
Range Tx, Ty, Tz:
+/-20 Nm
Resolution Fx, Fy, Fz:
0.1000 N
Resolution Tx, Ty, Tz:
0.0050 Nm
Diameter:
82 Mm
Height:
25.4 Mm
Model Family:
ATI Axia Force Torque Sensor Series
Product Description

Overview

The Axia80-M20 is a six axis force torque sensor that measures the three forces and three moments a robot applies at its wrist. With a range of +/-500 N in Fx and Fy, +/-900 N in Fz and +/-20 Nm in Tx, Ty and Tz, this force torque sensor covers grinding, polishing, assembly and insertion work on medium payload robots, and it measures each axis independently rather than inferring force from motor current.

Resolution on this force torque sensor is 0.1000 N on force and 0.0050 Nm on torque, which is fine enough to detect a part touching a fixture before the robot pushes into it. That is the basis of force-controlled grinding: instead of teaching a path that follows an assumed surface, the force torque sensor lets the robot hold a set contact force while the surface moves under it.

The body is 82 mm in diameter and 25.4 mm high, so the force torque sensor fits between flange and tool without stretching the wrist. ATI builds these sensors on a silicon strain gauge principle with low noise and high safety margins, and the interface electronics support Ethernet, PROFINET, EtherNet/IP, EtherCAT, CAN, USB, analog and wireless communication, so the force torque sensor fits an existing cell rather than forcing a new architecture.

Technical Specifications

ModelAxia80-M20TypeSix axis force torque sensor
Range Fx, Fy+/-500 NRange Fz+/-900 N
Range Tx, Ty, Tz+/-20 NmResolution Fx, Fy, Fz0.1000 N
Resolution Tx, Ty, Tz0.0050 NmDiameter82 mm
Height25.4 mmCommunicationEthernet, PROFINET, EtherNet/IP, EtherCAT, CAN, USB, analog, wireless

Axia Series Selection Reference

ModelFx, FyFzTx, Ty, TzDiameterHeight
Axia80-M8+/-150 N+/-470 N+/-8 Nm82 mm25.4 mm
Axia80-M20+/-500 N+/-900 N+/-20 Nm82 mm25.4 mm
Axia80-M50+/-1,200 N+/-2,000 N+/-50 Nm82 mm25.4 mm
Axia90-M50+/-1,000 N+/-2,000 N+/-50 Nm89.9 mm26.9 mm
Axia130-M125+/-2,000 N+/-4,000 N+/-125 Nm130 mm39.2 mm
Axia130-M300+/-4,000 N+/-6,000 N+/-300 Nm130 mm39.2 mm

What Force Control Changes on the Floor

  • • Grinding and polishing within the +/-500 N range: the force torque sensor holds contact force constant, so surface finish stops depending on how well the path was taught.
  • • Assembly: insertion force is monitored in real time against the 500 N Fx, Fy limit, so a cross-threaded or misaligned part stops the cycle before damage.
  • • Contact detection at 0.1000 N resolution: the force torque sensor finds the part, so search routines and touch probes can be removed from the program.
  • • Process data: every cycle produces a force signature that can be logged, which is how a grinding cell proves consistency to a customer.
  • • Machine tending: the +/-900 N Fz limit and force torque sensor thresholds protect fixtures when a blank is missing or double-stacked.

Advantages

Fits the Cell You Already Have

  • • One force torque sensor covers Ethernet, PROFINET, EtherNet/IP, EtherCAT, CAN, USB, analog and wireless interfaces.
  • • At 82 mm diameter and 25.4 mm height, the sensor adds little length between the flange and the tool.
  • • The measurement ranges suit medium robots, so the force torque sensor is not oversized for the payload class.

Resolution That Detects Real Contact

  • • 0.1000 N force resolution reveals the moment a tool touches a part rather than waiting for motor current to rise.
  • • 0.0050 Nm torque resolution catches tilt and edge contact, which is what ruins a chamfer or a bearing seat.
  • • Because all six axes are measured independently, the force torque sensor reports the true load, not a single-axis estimate.

Data You Can Hand to a Customer

  • • Force traces per cycle turn a grinding or assembly claim into evidence.
  • • Trending force over a shift shows tool wear before scrap appears.
  • • The force torque sensor output can drive both control and quality records from the same device.

Applications

  • • Force-controlled grinding and polishing on a robot grinding workstation.
  • • Deburring where contact force must stay within a band along a varying edge.
  • • Peg-in-hole and press-fit assembly with live insertion force monitoring.
  • • Bearing, seal and gear seating where tilt must be detected early.
  • • Surface finishing of castings and welded frames with constant pressure.
  • • Machine tending cells that need contact detection and overload protection.
  • • Research and process development where every cycle must be measured.

FAQ

Q1. What can the Axia80-M20 force torque sensor measure?
Three forces and three moments: +/-500 N in Fx and Fy, +/-900 N in Fz and +/-20 Nm in Tx, Ty and Tz, with 0.1000 N force resolution and 0.0050 Nm torque resolution.

Q2. Why use a force torque sensor instead of motor current?
Motor current includes friction, gravity and gear losses, so it is a poor force estimate. A force torque sensor measures the load at the wrist directly, which is what makes constant force grinding and reliable insertion monitoring possible.

Q3. How does it connect to my robot?
The interface electronics support Ethernet, PROFINET, EtherNet/IP, EtherCAT, CAN, USB, analog and wireless, so the force torque sensor connects to most robot controllers or to a PC for process development.

Q4. Is the body size a problem on a small robot?
The sensor is 82 mm in diameter and 25.4 mm high, and the model range starts at +/-150 N for lighter tasks. If the force torque sensor is too large for your payload, we quote the smaller Axia80-M8.

Q5. What resolution do I need for grinding?
0.1000 N on this 500 N force torque sensor is more than enough for constant force grinding on metal; the limit is usually the robot stiffness, not the force torque sensor resolution.

Q6. Can it log data for quality records?
Yes. The force torque sensor streams force and torque data, including the +/-20 Nm torque channels, through the interface electronics, so a cell can record a force signature for every part and trend it against tool wear.

Q7. Which model should I choose for a heavier application?
Axia80-M50 raises the force torque sensor ranges to +/-1,200 N and +/-50 Nm, and the Axia130 models go to +/-4,000 N and +/-300 Nm. We size the force torque sensor from your tool weight and expected contact force.

Related Products
Send An Inquiry