logo

300 kg Payload Quick Change Tool Changer with 0.015 mm Repeatability and 31,000 N Locking Force for Robotic Tool Changer Workstation

Place of Origin: United States
Brand Name: ATI
Certification: ISO 9001:2015
Model Number: QC-160 (9120-160FM-000-000-SM-E)
Minimum Order Quantity: 1 Set
Price: USD 9800-12800 / Set
Packaging Details: Export wooden case with foam-lined master and tool plate compartments, desiccant and shock indicator, port plugs fitted
Delivery Time: 15 working days for stock, 25-35 days for production
Payment Terms: T/T,L/C at sight
Supply Ability: 60 Sets per Month
Inquiry Now
Get A Quote
Specifications
Highlight Features

300kg Payload 31000N Locking Force

,

0.015mm Repeatability Quick Change

,

ATI QC-160 Pneumatic Tool Changer

Payload Limit:
300 Kg
Repeatability:
0.015 Mm
Locking Force:
31,000 N
Operating Pressure:
4.2 - 7 Bar
Mounting Pattern:
ISO 9409-1-125-10-M10
Exchange Time:
0.3 S Open / 0.1 S Close
Product Description
ATI QC-160 300kg payload pneumatic quick change tool changer - 30 second product video

▶ Watch the 30-second product video  ·  300 kg payload · 31,000 N locking force · 0.015 mm repeatability

Overview

The ATI QC-160 is a pneumatic quick change tool changer rated for a suggested payload of 300 kg, and this listing supplies it as a matched master and tool pair ready to be built into a robot workstation. The tool changer is the interface that lets one industrial robot arm park a welding torch, swap to a gripper, pick up a deburring spindle and return to its first tool, all inside a single cycle, without an operator entering the cell.

A locking force of 31,000 N and a repeatability of 0.015 mm are the two numbers that matter most in daily production. The high locking force keeps the tool changer rigid under heavy welds, heavy forgings and high moment loads, while the 0.015 mm repeatability means a tool returned to the changer comes back to the same tool centre point, so the robot program does not need a re-teach after every exchange.

The 300 kg payload tool changer carries five G3/8 inch pneumatic feed-throughs at 1,400 l/min and four G1/2 inch feed-throughs at 1,600 l/min, so a gripper, a torch with air blast, a blow-off nozzle and a clamp can all be serviced through the changer itself. Utility modules for electrical signals, PROFINET and servo power mount on the 4 x J module pattern, which is what turns this tool changer into a complete workstation interface.

Mechanically the quick change tool changer uses a cam-driven locking mechanism with a fail-safe pneumatic release: air pressure is needed to unlock, and a loss of air leaves the tool changer locked. Lock and unlock sensing can be integrated in the master, feeding a PNP signal straight back to the robot controller. The body is built to ISO 9409-1-125-10-M10 mounting on both sides, the standard robot flange pattern for this payload class.

Technical Specifications
Suggested Payload Limit300 kgLocking Force31,000 N
Repeatability0.015 mmWeight (Master / Tool)6.5 kg / 2.9 kg
Mounting PatternISO 9409-1-125-10-M10Module Mounting Pattern4 x J
Pneumatic Feed-Throughs I5 x G3/8 in at 1,400 l/minPneumatic Feed-Throughs II4 x G1/2 in at 1,600 l/min
Lock / Unlock PortG1/8 inOperating Pressure4.2 - 7 bar
Opening / Closing Time0.3 s / 0.1 sCylinder Volume279 cm3 per double stroke
Static Moment Mxy / Mz2,710 Nm / 920 NmDynamic Moment Mxy / Mz5,000 Nm / 2,300 Nm
Max Locking Offset Z2.5 mmMax Locking Offset XY±2 mm / ±0.7°
Ambient Temperature5 to 60 °CCertificationISO 9001:2015 process control
Workstation Kit Scope of Supply
  • QC-160 quick change tool changer master with ISO 9409-1-125-10-M10 robot flange interface and integrated lock sensing.
  • Matched QC-160 tool plate with the same flange pattern, delivered as a pair so the tool changer is concentric out of the box.
  • Lock / unlock pneumatic fittings in G1/8 inch plus blanking plugs for unused feed-through ports.
  • Tool stand brackets and locating pins, so the tool changer parks tools repeatably inside the workstation.
  • Module mounting hardware for the 4 x J pattern, ready for a signal module, PROFINET module or servo module.
  • Inspection sheet with repeatability and locking force records, plus a port map for the pneumatic feed-throughs.
Advantages
Load Capacity and Rigidity for Heavy Tools
  • A 300 kg payload limit and 31,000 N locking force let the tool changer hold a loaded welding torch, a large gripper or a heavy spindle without chatter.
  • Static moment of 2,710 Nm and dynamic moment of 5,000 Nm are measured on the tool changer joint itself, so the limits cover real lever arms on a workstation.
  • The fail-safe locking design keeps the tool changer locked when air is lost, which protects the tool and the part during an emergency stop.
Repeatability That Removes Re-Teaching
  • 0.015 mm repeatability on the quick change tool changer means every tool returns to the same tool centre point, shift after shift.
  • A maximum locking offset of 2.5 mm in Z and 2 mm in XY is corrected automatically by the chamfered locking cam, so approach paths stay short.
  • Because the tool changer absorbs the docking tolerance, robot programs and touch-up routines stay valid when a tool stand is bumped.
Pneumatic Feed-Throughs Sized for Real Tools
  • Five G3/8 inch and four G1/2 inch lines on the 300 kg payload tool changer move 1,400 and 1,600 l/min, enough for large vacuum grippers and blow-off cycles.
  • Opening in 0.3 s and closing in 0.1 s keeps the tool changer exchange inside the working part of a short cycle, not outside it.
  • A 279 cm3 cylinder volume per double stroke keeps air consumption per exchange modest, which matters on high-cycle workstations.
Process Quality and Documentation
  • Each tool changer is assembled and tested as a master and tool pair, then released with a record of locking force and repeatability.
  • The manufacturer's ISO 9001 process control covers machining, assembly and final inspection of the tool changer.
  • A port map and inspection sheet travel with the unit, so commissioning and later fault finding follow documented data instead of guesswork.
Built to Be Serviced in the Field
  • Lock and unlock sensing can be integrated in the master, so the robot controller confirms the tool changer state without extra sensors.
  • Wear parts sit behind a single cover plate, and the tool changer can be re-sealed on site without returning the unit.
  • No hydraulics are used anywhere in the tool changer, so there is no oil to leak onto the part or onto the floor of the cell.
Applications
  • Welding workstations that swap a torch for a gripper to load and unload fixtures with the same robot arm, using one quick change tool changer.
  • Machine tending cells where the tool changer exchanges a blank gripper for a finished part gripper inside the cycle.
  • Heavy payload handling and palletizing, where the 300 kg payload tool changer carries large vacuum frames and mechanical grippers.
  • Deburring, grinding and polishing stations that need a spindle mounted through the tool changer with air service lines.
  • Assembly cells that change from screwdriving to press fitting, using the module pattern on the tool changer for signal exchange.
  • Automotive body and powertrain lines that keep several tools on stands and let the tool changer select them by program.
  • Foundry and forging cells where the tool changer is expected to survive high moments, dust and temperature up to 60 °C.
FAQ

Q1. What payload can this quick change tool changer carry?
The suggested payload limit for the ATI QC-160 is 300 kg. Combined with a 31,000 N locking force and a 5,000 Nm dynamic moment, the tool changer suits heavy welding, large grippers and palletizing tools on a 300 kg payload robot.

Q2. How is the 0.015 mm repeatability of the tool changer achieved and proven?
The locking cam centres the tool plate mechanically on every closure, and each master and tool pair is tested before shipment. The repeatability record for the 0.015 mm figure is supplied with the tool changer, together with the locking force test data.

Q3. Which air lines pass through the tool changer?
Five G3/8 inch feed-throughs at 1,400 l/min and four G1/2 inch feed-throughs at 1,600 l/min pass through this tool changer. Lock and unlock use a separate G1/8 inch port working between 4.2 and 7 bar.

Q4. Can I use this tool changer with only one tool stand?
Yes. The tool changer works with a single stand, but most workstations use two or more stands so the robot can select between a torch, a gripper and a spindle. Locating pins in the stands keep docking repeatable for the tool changer.

Q5. Is the tool changer safe if air pressure is lost?
The design is fail-safe: air pressure is required to unlock, so a loss of air leaves the 300 kg payload tool changer locked on the tool. Integrated lock sensing reports the state to the robot controller.

Q6. Which mounting pattern does the tool changer use?
Both master and tool plate use ISO 9409-1-125-10-M10, the standard robot flange pattern for this payload class. The module side uses the 4 x J pattern for signal, PROFINET and servo modules.

Q7. How fast is a tool exchange with this tool changer?
Opening takes 0.3 s and closing takes 0.1 s, so a complete tool changer exchange fits well inside a short handling cycle. Cylinder volume is 279 cm3 per double stroke, which keeps air use per exchange low.

Q8. What documentation and support come with the product?
Each pair ships with an inspection sheet, a pneumatic port map and mounting hardware. Our team supports stand layout, port assignment and module selection for the tool changer, and spare seals and wear parts are available for the service life of the unit.

Q9. What is the operating temperature and where can the tool changer be used?
The tool changer is released for 5 to 60 °C, which covers welding cells, foundry areas and unheated workshops. Machinery test records are supplied where applicable.

Related Products
Send An Inquiry