ESTUN ER170B-2650 Automated Transport Arm Between Conveyors

Overview

• • The ESTUN ER170B-2650 automates transport between conveyor lines.
• • A 170 kg payload covers parts that would otherwise be lifted by hand.
• • A 2650 mm span connects lines on either side of the base.
• • Programs are stored per part family for repeat transfer cycles.

Specifications

Advantages

• • A 2650 mm span links conveyors without adding a transfer conveyor.
• • A 170 kg payload removes manual lifting from the transfer point.
• • A 1092 kg body keeps transfer position stable at full reach.
• • Programs are stored per part family, so mixed lines change quickly.
• • IP54 protection suits halls with dust and coolant mist.
• • Interface signals to line PLCs follow a documented address list.
• • Packaging follows export crate standards with rust protection for sea freight.
• • Commissioning support covers safety checks, program handover and operator training.
• • Spare parts for common wear items and cables are held in local stock.
• • Documentation includes layout drawings, wiring schematics and a maintenance schedule.
• • Remote diagnostics are available for controller and drive faults during the warranty period.
• • Installation supervision can be scheduled with delivery to shorten ramp up time.
• • Acceptance testing is performed before shipment and a report is filed for the project.
• • Operator training covers daily checks, safe restart and basic program edits.
• • Fixtures are designed to suit the part family named in the project brief.
• • Safety circuits follow the plant standard and are documented for sign off.
• • Trial production runs are supported on site before acceptance.
• • Wear parts are specified with local part numbers for easy reordering.
• • Programming files are handed over in the controller project archive.
• • Warranty visits cover calibration checks during the first operating year.
• • Spare cable sets and connectors are recommended for continuous operation.
• • Loader and unloader interfaces are tested against the line PLC before handover.
• • Cable routing and dress pack layout are reviewed against the arm envelope before shipment.
• • Cycle time estimates are issued with the layout drawing for planning purposes.

Applications

• • Transfer of parts between conveyor lines.
• • Loading parts from infeed to machining fixtures.
• • Moving parts from machining to washing stations.
• • Transferring parts into inspection and packing lines.
• • Linking two production stages in a hall.

FAQ

• • What transfer work is supported? Parts moving between conveyor lines or between a conveyor and a fixture.
• • What payload and reach apply? The arm carries 170 kg with a 2650 mm span.
• • How does it connect to the line? Interface signals follow a documented address list agreed before commissioning.
• • What protection rating applies? The arm body is rated IP54.