KUKA KR210 R2700-2 3D Printing Robot with Material Print Head

Overview

• • The KUKA KR210 R2700-2 is a six axis robot supplied with a material print head for architectural 3D printing.
• • The 2700 mm working reach covers columns, wall panels and decorative elements in successive passes.
• • A 1077 kg body keeps the arm steady while material is deposited, which holds layer height constant.
• • IP67 protection allows the cell to work in dusty and damp site conditions.
• • Material feed, print speed and layer height are programmed together, so the finished surface stays uniform.
• • Commissioning follows a documented checklist, so the cell reaches production without open items.

Specifications

Advantages

• • A matched material print head keeps bead width and layer height consistent across long passes.
• • The 2700 mm envelope covers architectural elements without repositioning the robot.
• • IP67 sealing allows outdoor printing where dust and moisture are present.
• • Six axis motion keeps the nozzle normal to inclined and curved surfaces.
• • A 1077 kg body resists deposition reaction forces, which protects surface quality.
• • Print parameters are stored as recipes, so switching between element types is quick.
• • Offline programming shortens on site commissioning time.
• • Local engineering support covers print trials before the project starts.
• • Maintenance points sit at floor level, so planned service stops stay short.
• • Material feed lines are sized for the mix used, which avoids pressure loss along the run.
• • Commissioning covers nozzle height, purge routine and layer overlap settings.
• • The cell documentation includes a spare parts list covering routine wear items.
• • Wearing parts such as nozzles and feed hoses are listed as separate items in the manual.

Applications

• • Printing architectural columns and wall panels.
• • Decorative facade elements and landscape features.
• • Prototype structures for design verification.
• • Printing formwork and moulds for precast work.
• • On site printing of repetitive structural elements.
• • Research projects on additive construction methods.
• • Routine production work in general industry fabrication.

FAQ

• • Is a print head included? The robot is supplied with a material print head matched to the printing task and material.
• • How large an element can it print? The 2700 mm working reach defines the printable envelope before the base is repositioned.
• • What materials can be used? Mortar, paste and composite mixes are used, depending on the print head and pump set.
• • Can it print outdoors? Yes, IP67 sealing supports outdoor site conditions with dust and light rain.
• • What warranty applies? A one year warranty covers the robot under normal operating conditions.
• • Is training included? Commissioning includes operator training on programming, daily checks and safe restart procedures.