Quick Link
Quick Contact
Address
6 building,No 98, Fulian 1 road,Baoshan district, Shanghai, China.
Tel
86-021-80392549
Our Newsletter
Subscribe to our newsletter for discounts and more.
The CDB-8-11 is a motorless floating deburring scraper: it holds a conventional hand scraper blade and floats it against the part, so a job that used to be done by hand becomes a robot operation. There is no spindle and no burr to wear out, only a blade that follows the edge while the scraper holds contact force.
The scraper floats in two directions. Radially the chuck tilts to 5.5 degrees either side with 25 N to 76 N of radial force, and axially it travels 8 mm with 13 N to 67 N of force. That combination is what lets a floating scraper clean a cast edge that wanders, without the robot having to be taught every variation.
At 1.09 kg the deburring scraper is light enough to mount on a small robot or on a tool plate, and the ATC version (CDB-8-11-ATC) can be exchanged automatically by a tool changer so one robot can scrape, then grind, then handle in the same cycle. Because the scraper takes standard scraper blades, the cutting edge is a consumable the operator already knows how to change.
| Model | CDB-8-11 | Type | Motorless floating deburring scraper |
| Weight | 1.09 kg | Chuck Radial Float | +/-5.5 deg |
| Axial Float Stroke | 8 mm | Radial Float Force | 25 - 76 N |
| Axial Float Force | 13 - 67 N | Tool Holding | Conventional hand scraper blades |
| Auto Change Variant | CDB-8-11-ATC | Family | ATI CDB floating scraper series |
| Tool | Motor | Float | Force Range | Best For |
| CDB-8-11 scraper | None | +/-5.5 deg radial, 8 mm axial | 25 - 76 N radial / 13 - 67 N axial | Cast edges, scraped chamfers |
| CRT-12-5 file | Pneumatic | 8.1 mm float | 13 - 89 N | Corners, grooves, cross-holes |
| AC-90 axial float | Pneumatic | 4.1 mm axial | 8.5 - 33 N | Flat edges and chamfers |
| AOV-10 orbital | Pneumatic vane | 13 mm axial | 6.7 - 67 N | Surface sanding and blending |
Q1. What is a floating deburring scraper?
It is a motorless holder that floats a conventional scraper blade against the part. The CDB-8-11 controls force in two axes, so the scraper follows the real edge instead of a taught position.
Q2. How much does the scraper float?
5.5 degrees either side in the radial direction with 25 N to 76 N of force, and 8 mm axially with 13 N to 67 N. Both axes float at the same time, which is what keeps the deburring scraper engaged on a variable cast edge.
Q3. Does it need air?
No. The floating scraper has no motor, so only the robot and the blade are involved. Air is needed only if you pair it with a pneumatic tool changer.
Q4. What blades does it use?
Conventional hand scraper blades, which is why the deburring scraper is easy to keep running. Blade changes happen at the cell without special tooling.
Q5. Can it be picked up automatically?
Yes. The CDB-8-11-ATC variant carries the automatic coupling, so a tool changer can pick the scraper and return it to its stand.
Q6. Why choose the scraper over the CRT-12-5 file tool?
The file tool is powered and removes material fast in corners and grooves. The deburring scraper is unpowered and produces the exact chamfer a hand scraper would, which suits cast edges and thin sections where a powered tool cuts too aggressively.
Q7. Is 1.09 kg light enough for a cobot?
For most collaborative arms rated 5 kg and above, yes. The floating scraper mounts close to the flange and needs no air line, so the wrist load is simply its own weight.