Quick Link
Quick Contact
Address
6 building,No 98, Fulian 1 road,Baoshan district, Shanghai, China.
Tel
86-021-80392549
Our Newsletter
Subscribe to our newsletter for discounts and more.
The CRT-12-5 is a pneumatic reciprocating deburring file tool: instead of a spinning burr it drives a file back and forth with a 5 mm stroke at up to 12,000 strokes per minute. That motion is what reaches burrs a rotary tool cannot touch, because a file enters a corner, a groove or a cross-hole edge along the direction the burr actually sits in.
The deburring file tool floats over an 8.1 mm range and holds cutting force between 13 N and 89 N, set by air pressure. On a robot this means the CRT-12-5 file tool keeps pressure constant while the arm follows the path, so a cast corner and a machined groove are deburred with the same tool and the same program style.
At 3.08 kg the reciprocating file tool is a serious industrial unit rather than a hobby tool: the mass is there to keep the stroke stable when the file bites. Because the cutting force is adjustable, the same CRT-12-5 can clean a soft aluminium edge at low force and a steel weld burr at the top of the 89 N range.
| Model | CRT-12-5 | Tool Type | Pneumatic reciprocating file tool |
| Stroke Length | 5 mm | Stroke Rate | 12,000 SPM |
| Float Stroke Range | 8.1 mm | Float Force Range | 13 - 89 N |
| Weight | 3.08 kg | Cutting Force | Adjustable by air pressure |
| Typical Tooling | Files and riffler files | Family | ATI CRT material removal tools |
| Tool | Motion | Working Range | Best For |
| CRT-12-5 file tool | Reciprocating 5 mm, 12,000 SPM | 13 - 89 N, 8.1 mm float | Corners, grooves, cross-hole edges |
| CDB-8-11 scraper | Floating blade, no motor | 25 - 76 N radial, 13 - 67 N axial | Hand-scraping jobs made automatic |
| AC-90 axial float | Rotary burr | 8.5 - 33 N, 4.1 mm float | Edges and chamfers on flat faces |
| AOV-10 orbital | Eccentric orbital sanding | 6.7 - 67 N, 13 mm float | Surface blending and sanding |
Q1. What makes the CRT-12-5 different from a rotary deburring tool?
It files instead of milling. The 5 mm reciprocating stroke reaches into corners, grooves and cross-holes where a rotating burr cannot fit, and it cuts along the burr direction rather than across it.
Q2. What is the cutting force range of the deburring file tool?
13 N to 89 N, set by air pressure. The 8.1 mm float range keeps that force constant while the robot follows the path, so part tolerance does not change the cut.
Q3. How fast does it run?
Up to 12,000 strokes per minute with a 5 mm stroke. That combination removes corner burrs in one pass without the chatter a rotary tool produces at an interrupted edge.
Q4. Will 3.08 kg affect my robot?
For robots in the 20 kg payload class and above the effect is small. The mass sits close to the flange, and the deburring file tool is rigid, so no long lever arm is added to the wrist.
Q5. What tooling does it use?
Standard files and riffler files, which is why the deburring file tool suits narrow features. Files are consumables and are changed at the cell.
Q6. Can it deburr plastic without melting it?
Yes. At the low end of the 13 N to 89 N range the file tool removes flash without the heat a high-speed burr generates on plastic.