Quick Link
Quick Contact
Address
6 building,No 98, Fulian 1 road,Baoshan district, Shanghai, China.
Tel
86-021-80392549
Our Newsletter
Subscribe to our newsletter for discounts and more.
The AOV-10 is an eccentric orbital sander built for robot surface finishing. It pairs a pneumatic vane motor running up to 10,000 rpm with a floating head that travels 13 mm axially, so the orbital sander holds light contact pressure instead of pressing the pad into the part. That is the difference between blending a surface and dishing it.
Float force runs from 6.7 N to 67 N. At the low end the orbital sander polishes a composite panel or a painted surface; at the top of the range it cuts weld spatter and mill scale on steel. Because the force is set on the sander rather than in the robot program, the same AOV-10 covers aluminium, composite, wood and steel work.
The AOV-10 orbital sander weighs 2.56 kg, light enough for a medium robot to carry on a bracket and heavy enough that the orbital motion stays stable under load. The pneumatic vane motor has high torque for its size, which is what keeps pad speed from collapsing when the sander meets a curved surface.
| Model | AOV-10 | Type | Eccentric orbital sander |
| Float Range | 13 mm max axial / 5.1 mm recommended | Float Force Range | 6.7 - 67 N |
| Idle Speed | 10,000 rpm | Motor | Pneumatic vane motor |
| Weight | 2.56 kg | Pad Motion | Eccentric orbital |
| Materials | Aluminium, composite, wood, steel | Family | ATI AOV material removal tools |
| Tool | Weight | Float Range | Force Range | Speed |
| AOV-10 orbital sander | 2.56 kg | 13 mm axial (5.1 mm rec.) | 6.7 - 67 N | 10,000 rpm |
| ACT-390 orbital sander | 3.29 kg | 15 mm axial (7.6 mm rec.) | 14 - 74 N | 5,600 rpm |
| AC-90 axial float | 0.508 kg | 4.1 mm axial | 8.5 - 33 N | 30,000 rpm |
| CRT-12-5 file tool | 3.08 kg | 8.1 mm float | 13 - 89 N | 12,000 SPM |
Q1. What is the difference between the AOV-10 and a rotary sander?
The orbital sander uses an eccentric pad motion that produces a random scratch pattern, so it does not leave the swirl marks a rotary tool makes. Combined with 6.7 N to 67 N of float force, the AOV-10 finishes a surface rather than cutting into it.
Q2. How much axial float does the orbital sander have?
13 mm maximum, with 5.1 mm recommended working travel. That float absorbs casting and fixture variation so the sander keeps contact without a force sensor.
Q3. What speed does the AOV-10 run at?
10,000 rpm idle speed from a pneumatic vane motor. High torque at that speed keeps the orbital sander from stalling when the pad meets a curved surface or a weld bead.
Q4. Which materials can it sand?
Aluminium, composite, wood and steel. Force is set between 6.7 N and 67 N depending on the material: low for composite and painted surfaces, high for weld dressing on steel.
Q5. Is 2.56 kg too heavy for my robot?
For robots from roughly 10 kg payload upward, no. The orbital sander sits close to the flange, so the moment arm added at the wrist is small.
Q6. Does it need a force sensor?
No. The floating head of the orbital sander is the compliance. The robot carries the tool along the surface and the sander holds contact pressure.
Q7. When would I choose the ACT-390 instead?
ACT-390 offers a longer 15 mm float and 14 N to 74 N of force at 5,600 rpm, which suits heavier stock removal. The AOV-10 orbital sander is the lighter, faster option for finishing passes.