Quick Link
Quick Contact
Address
6 building,No 98, Fulian 1 road,Baoshan district, Shanghai, China.
Tel
86-021-80392549
Our Newsletter
Subscribe to our newsletter for discounts and more.
The AC-90 is an axial floating deburring tool built for robotic deburring on a grinding cell. Its head floats 4.1 mm along the tool axis and holds contact force in the 8.5 N to 33 N band, so the deburring tool follows the real edge of the part instead of the path the robot was taught. On castings, machined plates and moulded parts that difference is what separates a clean chamfer from a gouged edge.
Because the axial float absorbs part variation, a deburring tool like the AC-90 lets a programmer teach an approximate path and let the tool do the rest. There is no force sensor, no servo loop and no complex programming: the floating head keeps pressure constant while the robot moves, which is why this class of deburring tool is the standard answer for aluminium, plastic, steel and iron parts.
At 0.508 kg the AC-90 deburring tool is light enough for small robots and for tools mounted on the end of a longer arm, and its 30,000 rpm idle speed gives a clean cut with lower edge loading than a slow, high-torque tool. The body is compact, so it fits inside recessed pockets and along inside contours where a bulky tool cannot reach.
| Model | AC-90 | Tool Class | Axial floating deburring tool |
| Maximum Compliance | 4.1 mm axial | Axial Force Range | 8.5 - 33 N |
| Idle Speed | 30,000 rpm | Weight | 0.508 kg |
| Workpiece Materials | Aluminium, plastic, steel, iron | Mounting | Robot flange / tool holder |
| Family | ATI AC series material removal tools | Sibling Model | AC-180 (same force and speed band) |
Q1. What does an axial floating deburring tool do?
It lets the cutting head move 4.1 mm along the tool axis while holding a set contact force, so the deburring tool follows the real part edge instead of the taught path. That is what keeps chamfer width consistent on castings and machined parts.
Q2. What force range does the AC-90 cover?
The axial force range of this deburring tool is 8.5 N to 33 N, which covers aluminium and plastic edges as well as steel and iron burrs when the tool and burr are matched to the material.
Q3. Why does idle speed matter on a deburring tool?
At 30,000 rpm the burr sees a high surface speed, so the cut is clean and cool. A slow, high-torque deburring tool tends to smear aluminium and burnish edges instead of cutting them.
Q4. Do I need a force sensor to use it?
No. The axial float inside the deburring tool provides the compliance mechanically; the robot only has to carry the tool along the path, which is why programming stays simple on a grinding cell.
Q5. Is 0.508 kg light enough for a small robot?
For most 6 axis robots in the 5 kg to 20 kg payload class, yes. The deburring tool sits close to the flange, so its effect on the centre of gravity is small.
Q6. Which materials can it deburr?
Aluminium alloy, plastic, steel and iron are the materials listed for the AC series. For stainless and hardened steel we recommend confirming the burr and the force setting with us before shipment.
Q7. Is AC-180 an alternative?
AC-180 shares the same 4.1 mm compliance, 8.5 N to 33 N force band and 30,000 rpm speed, and is used where the head geometry suits a different approach angle. We quote both when the part geometry is borderline.