Quick Link
Quick Contact
Address
6 building,No 98, Fulian 1 road,Baoshan district, Shanghai, China.
Tel
86-021-80392549
Our Newsletter
Subscribe to our newsletter for discounts and more.
The SR175/2700 turnkey workstation packages a 6-axis 175 kg industrial robot with a pre-routed dress pack and a matched control cabinet, so a heavy-duty cell arrives as one delivered unit instead of three separate purchases. The arm reaches 2701 mm and repeats to ±0.06 mm, which covers full layer palletizing, heavy die handling, foundry take-out and large weldment transfer where a 175 kg payload and a 2701 mm reach cover the whole cell.
At this payload class the dress pack is not an accessory but a wear part: a cable bundle that is routed by hand at site will rub on axis 3 within months, and the resulting encoder faults are intermittent and expensive to trace. Delivering the arm with the bundle already fixed at both ends, together with a cabinet that is wired and tested against it, removes that failure mode before the cell starts production.
- SR175/2700 6-axis industrial robot, 175 kg payload, 2701 mm reach, ±0.06 mm repeatability, 1100 kg body weight, floor mounted.
- Pre-routed dress pack anchored at axis 3 and terminated at the wrist flange, sized so the cable and hose bundle keeps its bending radius through the full J1 to J6 range.
- 2 x Φ12 mm air line and 16-core integrated signal cable through the arm.
- Matched control cabinet with the robot drive and IO terminals wired and tested as one system.
- Documentation set: electrical diagram, IO list, dress pack layout, foundation load drawing and commissioning checklist.
- End effector is not included: a gripper or tool matched to the part weight is quoted separately, and we confirm the flange interface before the order is released.
- One purchase order, one interface: the dress pack routing, the tool IO and the cabinet wiring are already matched, so integration starts with programming rather than with cable re-routing.
- Payload usable at full reach: 175 kg is rated at the wrist with the arm structure to match, so a heavy gripper and a heavy part can be carried at 2701 mm without derating.
- Joint torque headroom: J4 1380 N·m, J5 1380 N·m, J6 735 N·m allows an offset centre of gravity, which is what large grippers and layer palletizing tools need.
- Dress pack kept inside its bending radius: the bundle is fixed at both ends, which is what prevents the intermittent encoder faults that appear after a few hundred thousand cycles on a self-routed arm.
- Protection matched to the environment: IP65 body keeps the arm running in dust and coolant mist without an add-on cover.
- Serviceable by design: dress pack sections and wrist connectors are replaceable line items, so a worn bundle is a planned stop rather than a breakdown.
| Robot model | SR175/2700 |
| Structure | Vertical articulated, 6 axes, AC servo driven |
| Max payload | 175 kg |
| Max reach | 2701 mm |
| Repeatability | ±0.06 mm |
| Body weight | 1100 kg |
| Max speed J1 to J6 | 125 / 115 / 120 / 190 / 185 / 250 °/s |
| Allowed joint torque | J4 1380 N·m, J5 1380 N·m, J6 735 N·m |
| Protection class | IP65 body |
| Mounting | Floor mounted |
| Air line and signal cable | 2 x Φ12 mm air line, 16-core integrated signal cable |
| Environment | 0 to 45 °C, 75% RH max, below 0.5 G vibration, under 80 dB(A) |
| Dress pack | Pre-routed cable and hose pack, fixed at axis 3 and wrist flange |
| Control cabinet | Matched cabinet with robot drive and IO terminals |
| End effector | Not included, heavy-duty gripper quoted separately |
| Safety options | Modular safety fence and light curtain available on request |
Full layer palletizing, heavy die handling, foundry take-out and large weldment transfer where a 175 kg payload and a 2701 mm reach cover the whole cell.
One year remote warranty covers the robot, the dress pack and the control cabinet. Remote diagnostics, parameter backup and programming support are included during the warranty period. On-site installation and commissioning are not included in the unit price and can be quoted separately. Foundation bolts, dress pack sections, wrist connectors and spare controller modules are available as separate line items.
Minimum order quantity is 1 set. Price is USD 32,800 to 33,800 per set, with 3% off for 10 sets or more. Lead time is 45 days after deposit, packing is a wooden case, and payment terms are T/T with 30% deposit before production and the balance before shipment. Tell us the part weight, the centre of gravity, the cycle time and the voltage on site, and we will confirm the flange and the foundation plan before the order is released.