Quick Link
Quick Contact
Address
6 building,No 98, Fulian 1 road,Baoshan district, Shanghai, China.
Tel
86-021-80392549
Our Newsletter
Subscribe to our newsletter for discounts and more.
The SR25/1720 turnkey workstation packages a 6-axis 25 kg industrial robot with a CTPM2F40 electric parallel gripper, a pre-routed dress pack and a matched control cabinet, so a complete cell arrives as one delivered unit instead of four separate purchases. The arm reaches 1718 mm and repeats to ±0.05 mm, which covers fast pick-and-place, bin picking, medium load machine tending and palletizing of cartons up to 25 kg, where the higher J3 and J4 speeds shorten the cycle rather than the reach.
Because the arm, the end effector, the cable route and the controller are specified together, the flange pattern, the tool IO mapping and the air and signal routing are already resolved at delivery. That removes the most common cause of first-run downtime in a new cell: an end effector that arrives with a different flange pattern, a dress pack that rubs on axis 3, or a cabinet that cannot drive the gripper without an extra module.
- SR25/1720 6-axis industrial robot, 25 kg payload, 1718 mm reach, ±0.05 mm repeatability, 240 kg body weight.
- CTPM2F40 electric parallel gripper, 40 mm stroke and 100 N grip force, servo driven with integrated drive and control, Modbus RTU (RS485) and IO as standard.
- Pre-routed dress pack anchored at axis 3 and terminated at the wrist flange, sized so the cable and hose bundle keeps its bending radius through the full J1 to J6 range.
- Matched control cabinet with the robot drive, gripper communication and IO terminals wired and tested as one system.
- Documentation set: electrical diagram, IO list, gripper wiring, dress pack layout and commissioning checklist.
- One purchase order, one interface: the flange pattern, the tool IO and the dress pack routing are already matched, so integration starts with programming rather than with adapter machining.
- Servo gripper instead of a pneumatic one: stroke, speed and grip force are commanded from the controller, so one gripper handles a thin shell and a heavier insert without changing fingers.
- Dress pack kept inside its bending radius: the bundle is fixed at both ends, which prevents the intermittent encoder and gripper faults that appear after a few hundred thousand cycles on a self-routed arm.
- 25 kg payload with a stiff arm structure: the rated load is usable at the wrist, not only close to the base, so a gripper, fingers and part can be carried at full reach.
- Repeatable part seating: ±0.05 mm robot repeatability combined with ±0.02 mm gripper repeatability keeps a nest fed without re-teaching after a finger change.
- Remote support ready: the controller is delivered with its network parameters documented, so remote diagnostics can start on day one of production.
| Robot model | SR25/1720 |
| Structure | Vertical articulated, 6 axes, AC servo driven |
| Max payload | 25 kg |
| Max reach | 1718 mm |
| Repeatability | ±0.05 mm |
| Body weight | 240 kg |
| Max speed J1 to J6 | 210 / 206 / 238 / 460 / 412 / 360 °/s |
| Protection class | IP54 body, IP65 wrist |
| Mounting | Floor, wall or ceiling |
| Air line and signal cable | 1 x Φ10 mm air line, 16-core integrated signal cable |
| Environment | 0 to 45 °C, 75% RH max, below 0.5 G vibration, under 80 dB(A) |
| Gripper model | CTPM2F40 electric parallel gripper |
| Gripper stroke and force | 40 mm stroke, 100 N max grip force |
| Gripper control | 24 V DC, max 2 A, Modbus RTU (RS485) and IO, optional CAN, TCP/IP, EtherCAT, Profinet |
| Dress pack | Pre-routed cable and hose pack, fixed at axis 3 and wrist flange |
| Control cabinet | Matched cabinet with robot drive, gripper communication and IO terminals |
| Safety options | Modular safety fence and light curtain available on request |
Fast pick-and-place, bin picking, medium load machine tending and palletizing of cartons up to 25 kg, where the higher J3 and J4 speeds shorten the cycle rather than the reach.
One year remote warranty covers the robot, the gripper, the dress pack and the control cabinet. Remote diagnostics, parameter backup and programming support are included during the warranty period. On-site installation and commissioning are not included in the unit price and can be quoted separately. Spare fingers, spare dress pack sections and spare controller modules are available as separate line items.
Minimum order quantity is 1 set. Price is USD 16,500 to 17,000 per set, with 3% off for 10 sets or more. Lead time is 45 days after deposit, packing is a wooden case, and payment terms are T/T with 30% deposit before production and the balance before shipment. Tell us the parts you handle, the cycle time you need and the voltage on site, and we will confirm the finger design before the order is released.