Quick Link
Quick Contact
Address
6 building,No 98, Fulian 1 road,Baoshan district, Shanghai, China.
Tel
86-021-80392549
Our Newsletter
Subscribe to our newsletter for discounts and more.
An edible oil packing hall looks clean until you stand next to the palletizer. Cartons leave the case packer with a film of oil on the board, the floor near the filler is always slightly slick, and a single leaking bottle turns a layer into a sliding stack. Combine that with a wrapping line that never stops and a shift pattern that runs around the clock, and a general-purpose handling robot starts costing money in crushed corners and re-stacked pallets. The FANUC M-410iC/110 is a four-axis palletizing robot sized for this duty. Its rated capacity covers a full layer of bottled oil cartons at line speed, its working envelope lets one unit serve two pallet positions from a single floor mount, and repeatable positioning keeps every layer aligned so the stretch hooder never has to chase a leaning stack. The sealed structure keeps oil mist and carton dust off the critical surfaces, while the purpose-built four-axis wrist swings wide layers between pick and place without wasted motion.
- Two pallet positions are served from one floor mount, keeping pace with a high-output filling and case packing line. - Wide, controlled wrist motion places full carton layers flat, so oily board surfaces do not slide out of pattern. - Dedicated palletizing kinematics cut wasted travel between pick and place, lifting cartons per hour without a second robot. - Repeatable placement holds layer alignment shift after shift, which reduces rewraps and rejects at the stretch hooder. - Sealed structure keeps oil mist, carton dust and cleaning spray away from the critical mechanical surfaces. - A compact floor base leaves room for pallet conveyors and forklift access in an existing packing hall. - Recipe switching between carton sizes and pallet patterns is handled in the controller, so a product change needs no mechanical rebuild.
- Runs on the proven FANUC R-30iB Plus controller, a platform plant maintenance teams already know across the line. - The controller takes signals from case packers, labellers, checkweighers and stretch hooders, letting the robot follow the line instead of a fixed cycle. - Palletizing software handles pattern selection and pallet build, so new carton sizes are added as recipes rather than rewired logic. - Shared spare parts and mechanical components across the M-410iC range simplify stocking for integrators and plant stores. - Standard fieldbus connectivity links the cell to the plant PLC, keeping pallet patterns and line status under one control system. - The mounting flange accepts vacuum layer grippers, carton clamps and bag grippers, so end-of-arm tooling can be matched to the product mix. - Floor, ceiling and wall installation options let the cell be laid out around existing conveyors instead of rebuilding the area.