logo

Any-Angle Mounted 12kg Payload 1450mm Reach Assembly Cell Robot Arm for Automated Assembly

Place of Origin: Germany
Brand Name: KUKA
Certification: CE, NRTL, CR, ISO 9283 Compliant
Model Number: KR 12 R1450-3 HW
Minimum Order Quantity: 1 Unit
Price: USD 29000-37000 / Unit
Packaging Details: Wooden pallet case with shock-proof foam, desiccant, moisture barrier and export-grade strapping
Delivery Time: 20-35 days after deposit
Payment Terms: T/T,L/C
Supply Ability: 20 Units per Month
Inquiry Now
Get A Quote
Specifications
Highlight Features

Any-Angle Mounted Assembly Arm

,

Compact 320mm Footprint Robot

,

12kg Payload Cell Robot

Maximum Reach:
1450 Mm
Rated Payload:
12 Kg
Pose Repeatability:
±0.02 Mm (ISO 9283)
Number Of Axes:
6
Protection Rating:
IP54 Arm / IP67 Wrist
Weight:
Approx. 170 Kg
Product Description
Overview

This KR 12 R1450-3 HW is built for automated assembly cells where floor space is already taken by presses, conveyors and test stations. Because the arm can be mounted on the floor, the ceiling, a wall or any desired angle, the assembly cell robot arm sits directly above or beside the fixture instead of beside the aisle, and a 320 mm x 322 mm base needs almost no free floor area.

The cell layout is not the only benefit. A rated payload of 12 kg with a 1450 mm reach covers a fixture nest, a screw feeder and an inspection station from one mounted position, while pose repeatability of plus/minus 0.02 mm to ISO 9283 keeps press-fit and screw driving results identical cycle after cycle. Axis speeds up to 720 degrees per second on A6 keep handling moves out of the takt time.

Construction, Quality Control and Environmental Profile

Quality control follows the load path. Frame and arm castings are machined in a single setup, gear units are matched to the measured backlash of each axis, and every unit is laser-tracked for alignment before the drivetrain is sealed. Each 12 kg payload assembly cell robot arm then completes a 72-hour continuous motion test at rated payload, and the torque, temperature and repeatability curves ship with the machine as its test report. Each report covers the full 12 kg payload 1450 mm reach envelope in the mounting orientation actually supplied.

Energy and material use shaped the specification as well. The arm weighs roughly 170 kg, so wall and ceiling brackets stay simple and the drives are sized smaller than on a heavier arm of the same 1450 mm reach. Powder coating is low-VOC, gear units are sealed for life so lubricant is neither topped up nor disposed of in normal service, and energy-optimised motion profiles flatten the current peaks of high-speed assembly cycles.

Stability is structural and electrical at once. A rigid frame resists reaction torque in vertical and inverted mounting, the arm body is IP54 while the wrist carries IP67 against coolant mist and wash-down, and cable routing stays internal so a wall-mounted assembly cell robot arm does not snag on cell guarding. The KR C5 micro-2 or KR C5 controller adds integrated safety functions, open fieldbus interfaces and remote diagnostics for fast integration.

Key Specifications
Maximum Reach 1450 mm Rated Payload 12 kg
Pose Repeatability ±0.02 mm (ISO 9283) Number of Axes 6
Mounting Position Floor, Ceiling, Wall, Any Angle Footprint 320 mm x 322 mm
Protection Rating IP54 (arm) / IP67 (wrist) Controller KR C5 micro-2 / KR C5
Weight approx. 170 kg Ambient Temperature 0 °C to 45 °C
Axis Speed A1 / A2 / A3 260 / 240 / 260 °/s Axis Speed A4 / A5 / A6 430 / 450 / 720 °/s
Certificates NRTL / CE / CR Primary Application Automated Assembly Cell Integration
Advantages
  • Any-angle mounting of this assembly cell robot arm places it inside the fixture area instead of beside the aisle.
  • 320 mm x 322 mm footprint needs almost no free floor space in a crowded cell.
  • 12 kg rated payload carries screw drivers, press tools and grippers without derating.
  • Plus/minus 0.02 mm repeatability holds press-fit and screw driving results stable.
  • 720 degrees per second on A6 keeps handling moves out of the takt time.
  • IP54 arm with IP67 wrist tolerates coolant mist and routine wash-down.
  • Internal cable routing avoids snagging on guarding in wall and ceiling mounting.
  • KR C5 micro-2 controller brings open fieldbus interfaces and remote diagnostics.
Typical Application Areas
  • Screw driving and press-fit stations in assembly cells
  • Wall or ceiling mounted cells with no free floor space
  • Electronics and small component assembly and testing
  • Fixture loading and unloading inside machining cells
  • Inspection and gauging with stable positioning
  • Dispensing, gluing and labelling of small components
Frequently Asked Questions
Why mount an assembly cell robot arm on a wall or ceiling?

Because cell floor space is usually occupied by presses, conveyors and test stations. Mounting this arm at any angle places it directly over the fixture, keeps the aisle clear and shortens cable runs, while the 12 kg payload 1450 mm reach envelope stays unchanged in any orientation.

What load and reach does the arm provide?

It is rated at 12 kg payload continuous duty with a 1450 mm reach, enough to cover a fixture nest, a screw feeder and an inspection station from one mounted position. Gripper weight and centre of gravity are checked against the payload diagram before the cell is frozen.

How accurate is the arm for press-fit and screw driving?

Pose repeatability is plus/minus 0.02 mm to ISO 9283 with rated payload, verified during the final motion test, and the recorded curves are supplied with the unit as its test report.

Does inverted or wall mounting change the payload rating?

Payload and repeatability are stated for the arm itself; the mounting bracket and cell structure must be designed for the reaction forces of the chosen orientation. Our engineers review the bracket and base with your cell layout before shipment.

What protection and certificates are provided?

The arm body is IP54 and the wrist IP67, and units are supplied with NRTL, CE and CR certificates as standard for European and North American integration.

How are delivery and after-sales handled?

Each unit ships in a wooden pallet case with shock-proof foam, desiccant and export strapping, together with axis data and test reports. Spare parts and commissioning guidance are available after delivery.

Send the cell layout, mounting orientation, fixture height and takt target, and our engineers will confirm whether this assembly cell robot arm fits the station, together with bracket design, tooling interface and delivery schedule.

Related Products
Send An Inquiry