H-Type Three-Axis Servo Welding Positioner Turntable 500kg-2000kg Load

H-Type Three-Axis Servo Welding Positioner Turntable 500kg-2000kg Load

Product Overview & Industry Challenge

• • An H-type three-axis welding positioner holds and turns heavy weldments so the operator or robot can reach every joint in the flat position instead of fighting gravity overhead.
• • The servo-electric turntable flips, tilts and rotates workpieces up to 2000 kg, cutting setup time and rework on large castings and fabrications.
• • Because the H-type frame uses a perpendicularity flipping axis, the workpiece stays square and repeatable through every repositioning cycle.
• • Rated IP65 and driven by a PLC, this robotic welding positioner survives the spatter, dust and coolant of a busy welding bay while staying simple to program.
• • Available in 500 kg, 1000 kg and 2000 kg load capacities, the turntable scales across light fabrication cells and heavy casting shops.
• • A compact 1500 * 800 * 1200 mm body weighing 300 kg keeps the floor footprint small while giving the axis rigidity under full load.
• • As a robotic welding positioner, it integrates with a robot arm or a manual station so one cell handles many part families.

Key Technical Specifications

Core Engineering Advantages

• • Three-axis motion of flip, tilt and rotate presents each weld seam in the flat or horizontal position, raising deposition rate and quality.
• • Servo-electric drive gives smooth, programmable indexing with repeatable stops, so the same fixture returns to the same angle every cycle.
• • PLC control stores part recipes, letting operators switch between the 500 kg, 1000 kg and 2000 kg load ranges without mechanical changeover.
• • The H-type perpendicularity flipping frame keeps geometry square and rigid while it turns heavy castings and fabrications.
• • IP65 sealing protects drives, plc and wiring from spatter, dust and coolant in continuous welding production.
• • A rigid 300 kg, 1500 * 800 * 1200 mm structure limits deflection and vibration under rated load for stable arc conditions.
• • Modular L-type, O-type, H-type and U-type configurations let one platform match different workpiece shapes.

Target Industrial Applications

• • Robotic welding: the positioner feeds heavy assemblies to a robot arm at the ideal torch angle to raise consistency and throughput.
• • Manual welding: the turntable turns and flips large weldments so the operator welds downhand instead of vertical-up.
• • Metal casting: it presents castings for grinding, gouging and dressing at the best working height.
• • Milling and drilling: the three-axis positioner indexes workpieces precisely for machining operations on large parts.
• • General fabrication: it handles tanks, frames and structural parts that are too heavy to reposition by hand.

Procurement & Engineering FAQ

Q: How much load can the H-type positioner handle?

A: The welding positioner is offered in 500 kg, 1000 kg and 2000 kg rated-load versions, so you can match capacity to the heaviest workpiece in your cell.

Q: Does the positioner need a special power supply?

A: It runs on 220V or 380V, 50/60Hz, drawing 1 to 3 kW depending on load class, and the servo-electric drive is controlled by a PLC.

Q: Will it survive spatter and dust in a welding bay?

A: Yes. The unit is rated IP65, sealing the servo drive, PLC and wiring against spatter, dust and coolant during continuous production.