300kg Industrial Welding Rotary Positioner Trough Hole Table for Robots

300kg Industrial Welding Rotary Positioner Trough Hole Table for Robots

Overview

• • This industrial welding rotary positioner is a trough hole turntable that holds and turns workpieces for robot welding with a range of arms.
• • A 300 kg rated load suits medium fabrications, rings and frames that need support from the inside of the table.
• • Rotation of +/-360 degrees presents the joint to the torch from the best angle, and the trough hole allows long parts to pass through.
• • Repeatability of +/-0.1 mm keeps the joint aligned to the robot program, so seams stay consistent across a production run.
• • Rotation speeds of 0.05 to 0.5 and 0.5 to 3.5 RPM with a 70 degree per second tilt cover creep and fast indexing.
• • Running on a three-phase 220 V supply at about 390 kg, the base is rigid enough to hold parts steady during welding.
• • The trough hole table with an R600 mm gyre radius suits rings, tubes and open frames used in robot welding stock.

Key Specifications

Advantages

• • A 300 kg load with an R600 mm radius suits medium rings and frames.
• • A trough hole table supports open and tubular parts from the inside.
• • Dual speed ranges cover creep welding and fast indexing.
• • +/-0.1 mm repeatability keeps seams aligned to the robot program.
• • A rigid 390 kg base holds parts steady during welding.
• • Compatible with various industrial robot welding arms.
• • A three-phase 220 V supply makes plant connection simple.
• • The rotating table raises arc-on time by removing manual handling.

Applications

• • Robot welding of rings and frames
• • Trough hole rotary table welding
• • Cylindrical and tubular part welding
• • General fabrication shops
• • Rotary work holding for automation
• • Flexible robot welding cells

FAQ

Q: What load can this rotary positioner carry?
A: It has a 300 kg rated load, which suits medium fabrications, rings and frames supported on the trough hole table.

Q: What is the trough hole table for?
A: The through hole lets long or tubular parts pass through and be supported from the inside, which helps on rings and open frames.

Q: How accurate is the positioning?
A: Repeatability is +/-0.1 mm, keeping the joint aligned to the robot program so seams stay consistent across a run.

Q: What rotation and speed does it offer?
A: It rotates +/-360 degrees and runs at 0.05 to 0.5 and 0.5 to 3.5 RPM with a 70 degree per second tilt.

Q: Which robots can it work with?
A: It integrates with various industrial robot welding arms as a rotating external axis.

Q: What power supply does it need?
A: The positioner runs on a three-phase 220 V, 50 Hz supply. Contact us with your part size for a configuration.

Q: Can you supply in bulk or sample orders?
A: Yes. We support single units and volume orders, and can confirm lead time once your quantity is fixed.