GBS-02-L200 L-Type 200kg 0.1mm Casting Welding Positioner for KUKA FANUC

GBS-02-L200 L-Type 200kg 0.1mm Casting Welding Positioner for KUKA FANUC

Overview

• • The GBS-02-L200 is an L-type casting welding positioner that holds and turns cast parts for automatic welding with KUKA, FANUC and YASKAWA robots.
• • It carries a 200 kg rated load, a practical size for castings, brackets and medium fabricated components.
• • Repeatability of +/-0.1 mm keeps the weld joint aligned to the robot program, so seams stay consistent across a run.
• • Rotation speeds of 0.05 to 0.5 and 0.5 to 3.5 RPM cover gentle positioning and faster indexing between welds.
• • The L-type arm reaches around cast parts for good torch access, which helps on complex joints and confined geometry.
• • Running on a three-phase 220 V supply and weighing about 510 kg, the base is rigid enough to hold castings steady while welding.
• • It is a straightforward way to add a rotating work holding axis to a robot welding cell for cast components.

Key Specifications

Advantages

• • A 200 kg load suits castings, brackets and medium components.
• • The L-type arm reaches around parts for better weld access.
• • Dual speed ranges cover gentle positioning and fast indexing.
• • +/-0.1 mm repeatability keeps seams aligned to the robot program.
• • A rigid 510 kg base holds cast parts steady during welding.
• • Compatible with KUKA, FANUC and YASKAWA robot arms.
• • A three-phase 220 V supply makes plant connection simple.
• • Suits automatic lines that weld the same casting in volume.

Applications

• • Automatic casting welding
• • Robot welding cells for cast parts
• • Automotive and machinery components
• • Rotary work holding for automation
• • General fabrication shops
• • Bracket and frame welding

FAQ

Q: What load can the GBS-02-L200 carry?
A: It has a 200 kg rated load, suitable for castings, brackets and medium fabricated components in a robot welding cell.

Q: How accurate is the positioning?
A: Repeatability is +/-0.1 mm, keeping the weld joint aligned to the robot program so seams stay consistent across a run.

Q: What speeds does the positioner offer?
A: It runs at 0.05 to 0.5 and 0.5 to 3.5 RPM, covering gentle positioning and faster indexing between welds.

Q: Which robots can it work with?
A: It is designed for KUKA, FANUC and YASKAWA industrial welding robots as a rotating external axis.

Q: What is it best suited to?
A: It suits automatic casting welding and other medium components, where the L-type arm reaches around the part for good torch access.

Q: What power supply does it need?
A: The positioner runs on a three-phase 220 V, 50 Hz supply. Contact us with your casting size for a configuration.

Q: How quickly can the part be indexed?
A: Rotation speeds of 0.05 to 0.5 and 0.5 to 3.5 RPM let the positioner creep for a weld pass or index quickly between cast parts.

Q: Can you supply in bulk or sample orders?
A: Yes. We support single units and volume orders, and can confirm lead time once your quantity is fixed.