KUKA KR 210 R2700-2 210kg Payload 2701mm Reach 6 Axis Industrial Robot Arm

KUKA KR 210 R2700-2 210kg Payload 2701mm Reach 6 Axis Industrial Robot Arm

Overview

• • The KUKA KR 210 R2700-2 is a six axis industrial robot arm built for a rated payload of 210 kg, positioned at the heavy end of the KR QUANTEC range for press tending, palletizing and large part transfer.
• • Its 2701 mm maximum reach lets the arm cross a press line, reach the far side of a conveyor and stack a full pallet layer from a single floor fixed position.
• • Pose repeatability of +/-0.05 mm to ISO 9283 keeps a 210 kg tool and workpiece in the same position on every cycle, so fixtures, clamps and stack patterns stay aligned.
• • With reduced load centre distance the arm carries up to 270 kg, giving engineers headroom for heavy grippers, vacuum frames and multi-part end effectors.
• • Weight is approximately 1077 kg on a 754 mm x 754 mm footprint, a stiff cast structure that absorbs reaction torque when the wrist accelerates a heavy load.
• • Protection rating IP65 on the body and IP65/IP67 on the in-line wrist handles dust, coolant mist and washdown splash found in machining, die casting and glass plants.
• • The KR C4 controller paired with the KUKA smartPAD-2 teach pendant provides motion control, safety logic and fieldbus connectivity on one familiar programming platform.
• • Axis speeds of 120 deg/s on A1, 115 deg/s on A2 and up to 220 deg/s on A6 keep this industrial robot arm quick through heavy duty cycles without overshooting the programmed point.
• • A working ambient range of 0 degC to 55 degC allows installation next to furnaces, presses and unheated warehouses.
• • Rated supplementary load on the arm is 50 kg, enough for cable packs, camera brackets and secondary tooling on the forearm.
• • Typical duties include press to press transfer, bag and carton palletizing, foundry part removal and heavy assembly line feeding.

Key Specifications

Advantages

• • A 210 kg rated payload removes the need for two smaller robots on one heavy handling job.
• • The 270 kg maximum payload covers large grippers and vacuum frames without sacrificing cycle speed.
• • The 2701 mm reach spans two machines from one fixed base, cutting foundation work and floor space.
• • +/-0.05 mm repeatability protects stack accuracy and press die alignment at full load.
• • IP65 body and IP65/IP67 wrist protection cut downtime from coolant, dust and swarf ingress.
• • KR C4 control and the smartPAD-2 pendant keep programming consistent with existing KUKA cells.
• • A 1077 kg cast structure damps vibration, so the industrial robot arm settles heavy parts without bounce at the pick point.
• • Axis speeds up to 220 deg/s on A6 shorten transfer time on high rate lines.
• • Widely available spare parts and service documentation keep long life assets running.

Applications

• • Press tending and press to press transfer of stamped body panels.
• • Palletizing of bags, cartons and drums at end of line.
• • Foundry and die casting part extraction with cooling and quenching transfer.
• • Heavy assembly line feeding of engines, gearboxes and battery housings.
• • Glass, stone and panel handling where load weight and reach both matter.
• • Depalletizing and layer forming in food, chemical and building material plants.
• • Machine tending of large horizontal lathes and machining centres.
• • Heavy part loading of fixtures before welding or inspection.

FAQ

Q: What is the KR 210 R2700-2 designed for?
A: It is a heavy duty six axis industrial robot arm for press tending, palletizing, foundry extraction and large part handling. Tell us the part weight and layout and we will confirm the load case.

Q: How much can it lift?
A: Rated payload is 210 kg and the maximum payload is 270 kg with reduced load centre distance. The exact KUKA load case is verified with KUKA.Load before delivery.

Q: What is the maximum reach?
A: 2701 mm, which usually covers two machines or a full pallet position from one floor mounted base.

Q: How repeatable is the arm?
A: Pose repeatability is +/-0.05 mm according to ISO 9283, holding stack patterns and fixture positions stable at full payload.

Q: Which controller and pendant are supplied?
A: The robot runs on a KR C4 controller with the KUKA smartPAD-2 teach pendant, so programming matches other KUKA cells on site.

Q: What protection rating does it have?
A: IP65 on the arm body and IP65/IP67 on the in-line wrist to IEC 60529, covering dust, coolant mist and washdown splash.

Q: How much does the robot weigh?
A: Approximately 1077 kg with a 754 mm x 754 mm footprint, so foundation and anchor planning follow that load.

Q: What are delivery and terms?
A: Lead time is 15 to 30 days after deposit for standard configurations. FOB, CIF and other terms are quoted on request; contact us with your destination port.