35kg Payload 2100mm Reach IP67 Collaborative Robot for Heavy-Duty Machine Tending

Overview

• • The AUBO-G35 is a 6-axis adaptive collaborative robot from the AUBO G series, engineered for heavy-duty machine tending on modern production lines.
• • As a heavy-load 35kg payload collaborative robot, it combines a 35 kg payload with a 2100 mm working radius and 0.05 mm repeatability in one platform.
• • A 115.0 kg arm body with ø315 mm mount face diameter supports floor and ceiling mount installation for compact cell layouts.
• • Tool speed up to 6.4 m/s with 1500 W average power and 6000 W peak power keeps cycle times short during high-mix changeovers.
• • As an IP67 collaborative robot, the arm is sealed against coolant mist, dust and wash-down zones where standard cobots need extra covers.
• • EtherCAT-ready Gigabit Ethernet, RS485, configurable digital I/O and analog inputs let this 2100mm reach cobot connect to existing PLC and safety networks.
• • The AUBO-CB-G40 or G40-MINI controller option matches either standalone cells or compact multi-robot configurations.

Specifications

Advantages

35kg Payload Collaborative Robot for Large Workpieces

• • A 35 kg payload collaborative robot carries grippers, weld torches and heavy fixtures without a second handling device.
• • The 2100 mm working radius covers a full machine-tending envelope from one fixed base position.
• • A 115.0 kg rigid arm structure with ø315 mm mount face diameter reduces vibration when handling off-centre loads.

IP67 Collaborative Robot for Harsh Production Floors

• • IP67 protection on the arm keeps dust, coolant mist and splash water outside the joints.
• • Machining, deburring and washing stations therefore accept this IP67 collaborative robot without protective suits.
• • Sealed joints cut maintenance downtime and extend service intervals in continuous three-shift operation.

2100mm Reach Cobot with 0.05 mm Repeatability

• • The 2100mm reach cobot holds 0.05 mm repeatability, so part loading and screwdriving stay inside tolerance.
• • Force control and high-speed dynamic response let the arm follow contact tasks instead of only point-to-point moves.
• • A tool speed of 6.4 m/s shortens air moves and lifts throughput on repetitive tending cycles.

EtherCAT-Ready Integration and Dual-Mount Flexibility

• • Gigabit Ethernet with EtherCAT support links the arm to line controllers with low-latency fieldbus timing.
• • DI*4 / DO*4, AI*2, RS485 and 0V/24V output power address sensors, grippers and stack lights directly.
• • Floor and ceiling mount options plus AUBO-CB-G40 or G40-MINI controllers fit both new cells and retrofits.

Applications

• • Automotive manufacturing uses the cobot for engine-part handling, screwdriving and in-line assembly support.
• • Logistics and warehousing deploy the arm for heavy case transfer, depalletizing and end-of-line sorting.
• • Machining and machine tending rely on the 35 kg payload to load CNC fixtures and remove finished parts safely.
• • Welding and assembly lines pair the 2100 mm reach with positioners to cover long seams without rail travel.
• • Metal fabrication shops adopt the IP67 arm for grinding, deburring and press-side handling next to coolant.

FAQ

What payload and reach does the AUBO-G35 collaborative robot offer?

The AUBO-G35 is rated at 35 kg payload with a 2100 mm maximum working radius and 0.05 mm repeatability, so one 35kg payload collaborative robot can serve a large machine envelope.

Can this IP67 collaborative robot work in wet or dusty cells?

Yes. The arm carries an IP67 protection rating, which allows operation around coolant mist, metal dust and light wash-down without an additional protective suit.

Which controller should be ordered with the AUBO-G35?

Two controllers are supported: the AUBO-CB-G40 for full-size cells and the G40-MINI for compact layouts. Both match the same arm and I/O set, so selection depends on cabinet space and line architecture.

Is floor or ceiling mounting possible for this cobot?

Both are supported. The arm accepts floor and ceiling mount installation, and the 315 mm mount face diameter keeps the base footprint compact in either orientation. With a 115.0 kg arm weight, the mounting structure should be rated for the stated load.

Does the AUBO-G35 support EtherCAT and standard industrial I/O?

Yes. The interface set includes RS485*1 and Gigabit Ethernet*1 with EtherCAT support, DI*4 / DO*4 configurable digital channels, AI*2 analog inputs and 0V/24V output power at 2A (max 3A).

How fast can the arm move during a tending cycle?

Tool speed reaches 6.4 m/s with 1500 W average power and 6000 W peak power, which keeps rapid positioning fast while reserve power remains for heavy payload acceleration.

What certifications and minimum order quantity apply?

The AUBO-G35 is supplied with ISO 9001:2015 and CE certification, and the minimum order quantity is one unit for evaluation or series deployment.