Found 90 Products For:

"fanuc robot components"

Rail Mounted Fanuc Six Axis Robot with 30 Meter Travel for Handling

This rail mounted Fanuc six axis robot travels up to 30 meters along a track, moving automotive components between presses, buffers and inspection points on one installation Delivery and commissioning dates are confirmed against the project schedule.

video

FANUC M-10iD/12 6-Axis Welding Robot 12 kg Payload 1441 mm Reach 0.02 mm Repeatability for Welding

The FANUC M-10iD/12 is a 6-axis cable-integrated handling robot with a 12 kg payload, 1,441 mm reach and ±0.02 mm repeatability; hollow arm and wrist routing keep tool cables protected in press tending and laser welding cells.

video

30kg Payload 1889mm Reach Collaborative Robot CRX-30iA for Machine Tending Pick and place

FANUC CRX-30iA collaborative robot with 30 kg payload, 1889 mm reach and +/-0.05 mm repeatability, R-30iB Mini Plus control plus floor, wall or ceiling mounting for machine tending and palletizing cells.

Fanuc Industrial Robot Pipeline Package With Dress Pack for Palletizing Robot

Fanuc Industrial Robot Pipeline Package With Dress Pack for Palletizin is a robot dress pack made for robot cable management with solid capacity, delivering reliable, repeatable performance on the shop floor.

500kg Payload Compact Light Duty 7th Axis Robot Linear Track 0.05mm Accuracy

GL500 compact light duty 7th axis robot linear track with 500kg payload, 1.5m/s speed, 0.05mm accuracy, floor or steel structure mounting and RAL2009 carriage finish.

1000-4000kg Payload Chip Resistant 7th Axis Robot Linear Track RLC Series

RLC1000, RLC2000 and RLC4000 chip resistant 7th axis robot linear track with closed drag chain, enhanced rack and guideway protection, 30m travel and 0.5mm repeatability.

H-Type Single Axis FANUC KUKA Welding Positioner 500kg 3kW Rotator

H-type single axis FANUC KUKA welding positioner rotates 500kg parts as a servo external axis with IP67 protection and a two jaw chuck for steady automated welding seams, raising output on FANUC and KUKA lines.

500kg Payload 7th Axis Robot Ground Rail GBS-01-W500 for KUKA FANUC

500kg Payload 7th Axis Robot Ground Rail GBS-01-W500 for KUKA FANUC Key Specifications Model GBS-01-W500 Payload Capacity 500kg Travel Customizable modular Repeat Positioning +/-0.05mm Running Speed 500-1500mm/s Acceleration 1000mm/s2 Deceleration Ratio 1:10 Power Supply Three Phase 380V 50Hz Body ...

FANUC R-1000iA/130F 6-Axis Industrial Robot 130kg Payload 2230mm Reach High-Speed Spot Welding Robot for Dense Cells

Product descriptions from the supplier 130kg Payload and 2230mm Reach: The R-1000iA/130F carries a 130kg wrist load, the highest of the R-1000iA series, and reaches 2230mm. The J3 arm takes 20kg and the J3 casing takes 20kg, with the (C)+(D) combination held below 20kg. Wrist components withstand ...

1 2 3 4 5 Next