Quick Link
Quick Contact
Address
6 building,No 98, Fulian 1 road,Baoshan district, Shanghai, China.
Tel
86-021-80392549
Our Newsletter
Subscribe to our newsletter for discounts and more.
This no-teaching welding robot arm removes the slowest step in robotic welding: programming. Instead of jogging the torch to every start point, an operator loads the part, presses start once, and a laser vision sensor measures the real joint position, gap and mismatch before the arc is struck. The controller converts that scan into a weld path and stores it against the part number, so the next run needs no touch-up at all.
The unit is built as a 6-axis industrial robot arm with a 10 kg payload and a 1441 mm working reach, which is enough to carry a water-cooled torch, a laser sensor and a wire feeder without derating the motion. Because the interface kit speaks EtherNet/IP, PROFINET, DeviceNet and discrete I/O, the same welding robot arm can be dropped onto a FANUC, KUKA, YASKAWA or ABB controller that is already installed on your line, protecting the capital you have already spent.
| Category | Industrial Robot Arm | Degrees of Freedom | 6 Axis |
| Rated Payload | 10~50 kg | Working Reach | 1000~2800 mm |
| Repeatability | ±0.02 mm | Protection Rating | Body IP54, wrist IP67 |
| Welding Processes | MIG, MAG, TIG, plasma | Seam Tracking | Laser vision, teach-free |
| Compatible Controllers | FANUC, KUKA, YASKAWA, ABB | Mounting Position | Floor or inverted |
Q: Does this welding robot arm really run without manual teaching?
Yes. The laser vision sensor scans each joint before the arc starts, builds the weld path from the actual gap and mismatch it measures, and writes the offsets into the program automatically. A new workpiece is normally production-ready in about 15 minutes, so no jogging point by point and no re-teaching after a fixture moves.
Q: Can it be fitted to an existing FANUC, KUKA, YASKAWA or ABB controller?
The welding robot arm ships with a multi-brand interface kit that covers EtherNet/IP, PROFINET, DeviceNet and discrete I/O, plus adapter plates for the common flange patterns used by FANUC, KUKA, YASKAWA and ABB. In most retrofits the existing controller keeps running the motion and safety logic while the teach-free module handles seam finding and path correction.
Q: Which materials and plate thicknesses can this welding robot arm handle?
It is configured for MIG, MAG, TIG and plasma welding of carbon steel, stainless steel and aluminium from 0.8 mm to 12 mm. The 10 kg payload leaves room for a torch, a laser sensor and a wire feeder, and the ±0.02 mm repeatability keeps the torch height stable on thin sheet where burn-through is the main risk.
Q: What about delivery, installation and support?
Standard delivery is 15 to 30 working days after deposit, packed in an export-grade plywood case with shock-proof foam and a moisture barrier. Every unit includes a 12-month warranty, remote commissioning support over video, and a parameter library that can be pre-loaded with your most common joint types.
Tell us the part family, plate thickness and the controller already on your floor, and we will confirm the flange kit, torch package and parameter set for your welding robot arm before shipment.