Quick Link
Quick Contact
Address
6 building,No 98, Fulian 1 road,Baoshan district, Shanghai, China.
Tel
86-021-80392549
Our Newsletter
Subscribe to our newsletter for discounts and more.
As a heavy duty palletizing robot arm engineered for non-stop carton flow, this FANUC M-410iC/110 industrial robot arm works shoulder to shoulder with case packers, labellers and stretch wrappers in daily chemical plants where dust, humidity and three-shift running punish lighter machines. The rigid four axis structure carries full cases of detergent, shampoo and household chemicals from conveyor to pallet without the wrist deflection that forces operators to re-teach the same pattern every week, so the layer pattern stays square and the load stays stable at stack height. Its IP54 protected body and wrist shrug off the talcum dust and splash spill typical of a filling hall, while floor mounting and a generous working envelope let one unit serve two pallet stations or a pallet plus a slip-sheet dispenser. For line builders the practical result is fewer robots per line, shorter changeover between bottle sizes and a palletizer that keeps its accuracy after months of continuous running.
- Heavy duty four axis kinematics sized for stacked carton loads, so cycle counts and layer quality stay identical from the first pallet of the shift to the last.
- High speed palletizing motion with short acceleration ramps: full cases of daily chemical products are picked and placed without gripper sag or product tipping at stack height.
- Purpose-built pick and place geometry reaches deep into the pallet and over the conveyor, so one robot covers the whole build area instead of two smaller units.
- Wide wrist rotation and a long horizontal working range absorb bag-in-box, shrink-wrapped tray and corrugated case formats, cutting mechanical changeover to a recipe switch on the teach pendant.
- Consistent repeatability at the wrist flange keeps the vacuum or clamp tool aligned, reducing crushed corners and rejected cases on the pallet.
- Runs on the FANUC R-30iB Plus controller with standard palletizing software, so layer patterns, slip sheets and mixed SKU stacks are configured instead of hand-taught.
- Integrated signals and air supply routed on the upper arm reduce dress pack work; vision, conveyor tracking, safety scanners and upstream case packers connect through standard fieldbus options.
- Fully compatible with external linear tracks and pallet conveyors, letting integrators extend the working envelope without changing the robot program structure.
- Common FANUC M-410 spare parts and teach pendant across the fleet mean one spare kit and one training path for the whole palletizing line.
- Documentation, robot backup and PLC handshake examples are supplied by an authorized FANUC system integrator, shortening commissioning on site.