Quick Link
Quick Contact
Address
6 building,No 98, Fulian 1 road,Baoshan district, Shanghai, China.
Tel
86-021-80392549
Our Newsletter
Subscribe to our newsletter for discounts and more.
Machine tending punishes a robot in ways a catalogue photo never shows. The arm has to squeeze through a partially open door, reach past chuck jaws and coolant lines, grip a hot oily part, then swing clear before the next cycle starts - over and over, thirty seconds at a time, for years. A bulky arm loses that fight on clearance alone. This one is built the other way round: a slim forearm and compact wrist slip into tight machining envelopes while a rigid structure still carries a loaded gripper without deflection. Sealed wrist protection shrugs off coolant splash and cast-iron dust, so the joints keep their accuracy instead of grinding themselves loose, and the short, fast working envelope keeps loading time inside the machine's own cycle instead of stretching it.
- Faster spindle-to-spindle time: short, quick axis motions let the robot load and unload inside the machine cycle instead of adding to it.
- Reaches where bigger arms cannot: a slim forearm and compact wrist clear machine doors, chuck guards and coolant plumbing.
- Handles real part weights: enough wrist capacity for hydraulic grippers, double grippers and heavy billets without drooping or chatter.
- Repeatable seating: consistent part placement protects chuck jaws, fixtures and tool life, and cuts scrap from mis-clamped workpieces.
- One robot, two machines: the working envelope covers a second machine tool or a conveyor from a single pedestal, so one arm replaces two loaders.
- Runs through breaks and shift changes: stable positioning keeps the cell producing when no operator is standing at the door.
- Open fieldbus options: EtherCAT, DeviceNet and PROFINET connect the controller to machine tools, PLCs, conveyors and safety logic without custom gateways.
- Machine-tool handshaking built in: standard I/O and fieldbus blocks let the robot open chuck commands, door interlocks and cycle-start signals through the machine interface.
- Vision and force ready: iRVision and force sensing options handle part location in bins, on conveyors or in fixtures that are not precisely positioned.
- One programming environment: integrators already running FANUC cells reuse the same teach pendant workflow, program structure and safety routines.
- Offline cell design: ROBOGUIDE allows reach studies, cycle-time simulation and program proving before the robot is installed.
- Spares commonality: shared FANUC mechanical and controller parts plus a global service network keep mean time to repair short.