FANUC ARC Mate 100iD/8L 8kg Payload 6-Axis Robot for Arc Welding 2032mm Reach

Overview

Walk into any welding bay and the real enemy is not the arc itself: it is spatter clinging to cables, fume haze cutting visibility, radiant heat warping thin plate, and a fit-up gap that shifts from part to part. A welding robot earns its keep by holding the torch in the same place through all of it. This arm is dressed for that floor. Its torch cable runs inside the arm instead of looping outside it, so spatter, snags and cable wear stop dictating your downtime. The rigid, long-reach structure lets one robot cover large fabricated frames and reach deep into fixtures without repositioning the workpiece, while sealed wrist protection keeps the joints alive in an environment that eats unprotected equipment.

Advantages

- Higher arc-on time: the torch stays in the joint instead of waiting for an operator to reposition, so productive welding hours rise across the shift.
- Longer consumable life: internally routed torch and wire conduit stay clear of spatter and collision, cutting contact tip and liner changes.
- Wide weld envelope from one base: the long arm reaches across large frames and multi-fixture tables without adding a second robot or a positioner.
- Consistent bead placement: repeatable torch orientation holds penetration and leg length steady, so rework and touch-up grinding drop.
- Better seam access: a slim wrist with hollow torch routing fits into box sections, brackets and pipe joints that bulky dress packages cannot reach.
- Operator relief from heat and fume: the cell runs through the hot, dirty cycles while people handle fit-up and inspection only.

Integration

- Open fieldbus options: EtherCAT, DeviceNet and PROFINET connect the controller to power sources, PLCs, positioners and safety logic without custom gateways.
- Welding-native control: the controller carries arc start/end sequencing, touch sensing, arc sensing and weaving, so the weld process lives inside the robot rather than in a bolt-on box.
- Common platform logic: integrators already programming FANUC cells reuse the same teach pendant workflow, weld screens and safety routines, shortening commissioning.
- Offline engineering: ROBOGUIDE lets cells be laid out and programs proven before the robot reaches site, which protects install schedules.
- Spares and service continuity: shared FANUC mechanical and controller parts, plus a global service network, keep mean time to repair short.
- External axis and vision ready: coordinated positioners, linear tracks and seam-finding vision can be added on the same controller.

FAQ