GBS-02-O300 O-Type Single Axis Horizontal Rotary Welding Positioner 300kg

GBS-02-O300 O-Type Single Axis Horizontal Rotary Welding Positioner 300kg

Overview

• • The GBS-02-O300 is an O-type single axis horizontal rotary welding positioner built to turn workpieces for industrial robot welding.
• • It carries a 300 kg rated load with an R400 mm gyre radius, supporting rings, flanges and cylindrical parts.
• • Rotation of +/-360 degrees plus a +/-180 degree tilt presents the joint to the torch from the best angle.
• • Repeatability of +/-0.1 mm keeps the joint aligned to the robot program, so seams stay consistent across a run.
• • Rotation speeds of 0.05 to 0.5 and 0.5 to 3.5 RPM with a 70 degree per second tilt cover creep welding and fast indexing.
• • Running on a three-phase 220 V supply, the positioner integrates with a robot cell as an external axis.
• • It is a practical single axis rotator for ring, flange and cylindrical welding where the part must turn steadily.

Key Specifications

Advantages

• • A 300 kg load with an R400 mm radius suits rings, flanges and cylinders.
• • Single axis horizontal rotation simplifies robot programming.
• • Dual speed ranges cover creep welding and fast indexing.
• • +/-0.1 mm repeatability keeps seams aligned to the robot program.
• • A +/-180 degree tilt adds positioning flexibility.
• • A compact 200 kg base fits beside a robot without dominating the cell.
• • A three-phase 220 V supply makes plant connection simple.
• • The rotating table raises arc-on time by removing manual handling.

Applications

• • Ring and flange welding
• • Horizontal rotary robot welding
• • Cylindrical part welding
• • General fabrication shops
• • Rotary work holding for automation
• • Pressure vessel and tank welding

FAQ

Q: What load can the GBS-02-O300 carry?
A: It has a 300 kg rated load with an R400 mm gyre radius, which suits rings, flanges and cylindrical parts in a robot welding cell.

Q: How does the single axis work?
A: It rotates the workpiece horizontally through +/-360 degrees with a +/-180 degree tilt, presenting the joint to the torch from the best angle.

Q: How accurate is the positioning?
A: Repeatability is +/-0.1 mm, keeping the joint aligned to the robot program so seams stay consistent across a run.

Q: What speeds does the positioner offer?
A: It runs at 0.05 to 0.5 and 0.5 to 3.5 RPM with a 70 degree per second tilt, covering creep welding and fast indexing.

Q: What power supply does it need?
A: The positioner runs on a three-phase 220 V, 50 Hz supply and integrates with a robot cell as an external axis.

Q: Is it supplied ready to run?
A: It ships ready to bolt down beside a robot. Contact us with your part size and stroke for a configuration.

Q: Can you supply in bulk or sample orders?
A: Yes. We support single units and volume orders, and can confirm lead time once your quantity is fixed.